{"title":"Swap Parts","description":"","products":[{"product_id":"megan-racing-engine-mounts-lexus-is300-2001-2005","title":"Megan Racing Engine\/Motor Mounts Lexus IS300 2001-2005","description":"\u003cp\u003eMegan Racing presents Hard Rubber Polyurethane Motor Mounts, a solution designed to address the deterioration of soft rubber bushings over time due to constant flexing, vibration, and exposure to weathering. These motor mounts are engineered to reduce the risk of tearing and potential damage to your engine and transmission. Ideal for enthusiasts seeking optimal performance, the reinforced mounts allow more energy to be transferred to the wheels instead of being absorbed by soft rubber.\u003c\/p\u003e\n\u003cp data-start=\"1248\" data-end=\"1348\"\u003e\u003cstrong data-start=\"1248\" data-end=\"1273\"\u003eDurable Construction:\u003c\/strong\u003e Reinforced rubber mounts built to withstand performance driving demands.\u003c\/p\u003e\n\u003cp data-start=\"1351\" data-end=\"1461\"\u003e\u003cstrong data-start=\"1351\" data-end=\"1376\"\u003e70A Durometer Rating:\u003c\/strong\u003e Strikes a balance between performance and comfort, minimizing excessive vibration.\u003c\/p\u003e\n\u003cp data-start=\"1464\" data-end=\"1566\"\u003e\u003cstrong data-start=\"1464\" data-end=\"1492\"\u003eImproved Power Transfer:\u003c\/strong\u003e Less energy absorbed by soft rubber means more delivered to the wheels.\u003c\/p\u003e\n\u003cp data-start=\"1569\" data-end=\"1653\"\u003e\u003cstrong data-start=\"1569\" data-end=\"1592\"\u003eDirect Replacement:\u003c\/strong\u003e Designed specifically for the GS300 for easy installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet of 2:\u003c\/strong\u003e Each order includes a set of two motor mounts, ensuring comprehensive support for your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: \u003c\/strong\u003eMRS-LX-0340\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLexus IS300 2001-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProposition 65 Warning:\u003c\/strong\u003e For your safety, be aware of the Proposition 65 warning, indicating the presence of materials that may cause cancer and reproductive harm. Visit \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ehttps:\/\/www.P65Warnings.ca.gov\u003c\/a\u003e for detailed information.\u003c\/p\u003e\n\u003cp\u003eUpgrade your Lexus IS300 with Megan Racing Hard Rubber Polyurethane Motor Mounts for enhanced durability, reduced risk of wear, and improved power transfer to the wheels. Maximize your driving experience with these reinforced mounts designed for enthusiasts who demand more from their vehicles.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":47404249514305,"sku":"MRS-LX-0340","price":161.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/products\/megan-racing-engine-mounts-lexus-is300-2001-2005-851812.jpg?v=1707777704"},{"product_id":"248fab-lexus-gs300-hd-clutch-pedal","title":"248FAB Clutch Pedal Kit (Lexus GS300 1998-2005)","description":"\u003cdiv class=\"flex-1 overflow-hidden\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-mudiw-79elbk h-full\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-mudiw-1n7m0yu\"\u003e\n\u003cdiv class=\"flex flex-col pb-9 text-sm\"\u003e\n\u003cdiv data-testid=\"conversation-turn-219\" class=\"w-full text-token-text-primary\"\u003e\n\u003cdiv class=\"px-4 py-2 justify-center text-base md:gap-6 m-auto\"\u003e\n\u003cdiv class=\"flex flex-1 text-base mx-auto gap-3 md:px-5 lg:px-1 xl:px-5 md:max-w-3xl lg:max-w-[40rem] xl:max-w-[48rem] group final-completion\"\u003e\n\u003cdiv class=\"relative flex w-full flex-col lg:w-[calc(100%-115px)] agent-turn\"\u003e\n\u003cdiv class=\"flex-col gap-1 md:gap-3\"\u003e\n\u003cdiv class=\"flex flex-grow flex-col max-w-full\"\u003e\n\u003cdiv class=\"min-h-[20px] text-message flex flex-col items-start gap-3 whitespace-pre-wrap break-words [.text-message+\u0026amp;]:mt-5 overflow-x-auto\" data-message-id=\"6307046a-5c0d-4472-b68d-5b040cd7cd59\" data-message-author-role=\"assistant\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cp\u003eUpgrade your second-gen GS300 with this heavy-duty clutch pedal assembly bracket. This kit includes a robust mounting bracket along with additional optional components for a comprehensive enhancement. Here's what you get:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in the Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Clutch Pedal Assembly Bracket (248FAB):\u003c\/strong\u003e Engineered for durability, this bracket provides a sturdy foundation for your clutch pedal assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e2x 5\/16 Lock Nuts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e2x M8 Bolts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e2x M8 Lock Nuts\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOptional Additions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWilwood Reverse Mount Clutch Pedal:\u003c\/strong\u003e Upgrade your clutch pedal with the Wilwood Reverse Mount option for enhanced performance and style.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWilwood Slim Clutch Master Cylinder:\u003c\/strong\u003e Opt for the Wilwood Slim Clutch Master Cylinder to complement your upgraded clutch pedal assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnhance the clutch system of your second-gen GS300 with this heavy-duty bracket and optional Wilwood components, offering improved performance and durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"248 Fab","offers":[{"title":"Bracket Only","offer_id":47680305103169,"sku":"248-GS300-Clutch-Pedal","price":150.0,"currency_code":"USD","in_stock":false},{"title":"Bracket + Willwood Pedal (No Master Cylinder)","offer_id":47680305135937,"sku":"248-GS300-Clutch-Pedal-2","price":300.0,"currency_code":"USD","in_stock":false},{"title":"Bracket + Willwood Pedal + Master Cylinder Kit","offer_id":47680305168705,"sku":"248-GS300-Clutch-Pedal-3","price":429.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/248fab-clutch-pedal-kit-lexus-gs300-1998-2005-809701.jpg?v=1730335611"},{"product_id":"automatic-transmission-emulator-1uz-3uz-2jz-98-toyota-trans","title":"Automatic Transmission Emulator (ATEMU) W\/ Resistors 1UZ 3UZ 2JZ 98+ Remove CEL","description":"\u003cp\u003eIntroducing the Automatic Transmission Emulator (ATEMU) for 1UZ, 3UZ, and 2JZ 98+ Toyota Transmissions. The ATEMU is designed to simulate the critical features of specific Toyota\/Lexus automatic transmissions used in vehicles equipped with UZ\/JZ engines since 1998. This innovative device allows you to achieve the rated power output from your engine when using a factory ECU with a transmission other than the one it was originally designed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eCritical Feature Simulation:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e ATEMU replicates essential functions of Toyota\/Lexus auto transmissions, ensuring that your engine operates at its full potential without triggering the factory ECU's limp home mode. This prevents significant power and torque loss that would occur with mismatched transmissions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eCompatibility:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Designed to work seamlessly with factory ECUs and various transmission setups, providing flexibility for engine swaps and modifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eSimplicity of Installation:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e While maintaining ease of installation, ATEMU retains non-critical error codes for off-road applications, simplifying the setup process and reducing costs. However, these codes can be addressed with additional components if required for emission testing in street legal applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eResistor Pack:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003cspan\u003eAdditional resistor pack included to wire in if you need to eliminate the check engine light (CEL).\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cspan data-mce-fragment=\"1\"\u003ePlease note that our Automatic Transmission Emulator (ATEMU) for 1UZ, 3UZ, and 2JZ 98+ Toyota Transmissions typically requires 2-4 weeks for shipping (if out of stock).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your Toyota\/Lexus vehicle's transmission setup with the ATEMU Automatic Transmission Emulator, ensuring optimal engine performance and compatibility with different transmission configurations.\u003c\/p\u003e","brand":"All4Swap","offers":[{"title":"Default Title","offer_id":48028755198273,"sku":"ATEMU","price":230.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/automatic-transmission-emulator-toyota-1uz-3uz-2jz-98-remove-cel-678168.jpg?v=1727186944"},{"product_id":"ralco-rz-short-shifter-lexus-is300-2001-2005","title":"Ralco RZ Short Shifter Lexus IS300 2001-2005","description":"\u003cp\u003eUnleash the full potential of your Lexus IS300 with the Ralco RZ Short Shifter, engineered to provide precise and lightning-fast shifts for the ultimate driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003ePremium Construction:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Crafted from high-quality aluminum and hardened steel for unparalleled durability and performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003ePrecision Engineering:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Each Ralco RZ Short Shift kit is meticulously designed and manufactured to ensure a perfect fit and seamless operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eEnhanced Performance:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Experience up to 40% reduced throw for quicker and more responsive shifts, allowing you to harness the full power of your vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eDirect Bolt-On Installation:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Designed for easy installation with no modifications required, making it the perfect upgrade for enthusiasts of all skill levels.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eAccepts Stock Knob:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Compatible with the stock shift knob for a seamless integration with your vehicle's interior.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eShift Knob Included:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Includes a premium chrome shift knob with most applications, adding a touch of style to your driving experience.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eLexus IS300 2001-2005\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTransform your driving experience with the Ralco RZ Short Shifter and enjoy smoother, faster, and more precise shifts every time you hit the road.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"Ralco","offers":[{"title":"Default Title","offer_id":47990809329985,"sku":"914863","price":146.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/products\/ralco-rz-short-shifter-lexus-is300-2001-2005-122903.jpg?v=1710462904"},{"product_id":"nonstoptuning-short-shifter-kit-lexus-is300-02-05","title":"NST Short Shifter Kit Lexus IS300 2002-2005 5-Speed","description":"\u003cp data-mce-fragment=\"1\"\u003eElevate your driving experience with NST Short Shift Kits, meticulously engineered and tested for optimal performance in every application. Crafted from premium 6061-T6 anodized aluminum or 303 stainless steel, these kits ensure a precise, firm feel for enhanced control on the road or track.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eEnhanced Performance:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Enjoy crisper, more precise shifts thanks to a 30% to 50% reduction in throw compared to OEM setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eDurable Construction:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e CNC machined with exacting precision and built from high-grade materials, ensuring longevity and reliability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eEasy Installation:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e With simple tools and straightforward installation, upgrading to NST Short Shift Kits is hassle-free.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eVersatile Compatibility:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Compatible with both OEM and NST shift knobs, offering flexibility to suit your preferences.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003eOptimal for Street and Track:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Ideal for enthusiasts seeking improved performance without breaking the bank, making it a top \"bang per buck\" modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaterial: 6061-T6 Anodized Aluminum or 303 Stainless Steel\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWarranty: One Year Unlimited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your driving experience today with NST Short Shift Kits and feel the difference with every shift.\u003c\/p\u003e","brand":"NST","offers":[{"title":"Default Title","offer_id":47990866903361,"sku":"NSTSSK051","price":98.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/products\/nonstoptuning-short-shifter-kit-lexus-is300-02-05-508478.jpg?v=1710462837"},{"product_id":"beengineering-2jz-ge-vvti-coil-cover-gte-style-copy","title":"BEEngineering R154 Swap Transmission Cross Member (No Mount)","description":"\u003cp\u003eThe BEEngineering Transmission Cross-Member and Mount is engineered to facilitate the seamless installation of any R154 Toyota transmission into a Lexus IS300, GS300\/400\/430, Aristo, or Toyota Altezza\/IS200.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bolt-In:\u003c\/strong\u003e Designed for an effortless installation without the need for drilling or modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with both automatic and manual chassis configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Requirement:\u003c\/strong\u003e Must be used in conjunction with a MKIII Supra (1986-1992) style transmission mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJZX Transmission Compatibility:\u003c\/strong\u003e This cross-member is also compatible with later model JZX transmissions when used with the MKIII mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your vehicle with this precision-engineered cross-member for a straightforward and reliable transmission installation.\u003c\/p\u003e","brand":"BEEngineering","offers":[{"title":"Default Title","offer_id":49348474175809,"sku":null,"price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/beengineering-r154-swap-transmission-cross-member-no-mount-237637.jpg?v=1725944106"},{"product_id":"cube-speed-short-shifter-w50-w55-w57-w58-r154","title":"CUBE Speed Short Shifter W50 W55 W57 W58 \u0026 R154 Transmission","description":"\u003cdiv class=\"flex max-w-full flex-col flex-grow\"\u003e\n\u003cdiv data-message-model-slug=\"gpt-4o-mini\" class=\"min-h-8 text-message flex w-full flex-col items-end gap-2 whitespace-normal break-words [.text-message+\u0026amp;]:mt-5\" dir=\"auto\" data-message-id=\"9affbf26-f02a-4938-92ac-f03f8b836eef\" data-message-author-role=\"assistant\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[3px]\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cp\u003eElevate your driving experience with the CUBE Speed Short Shifter, designed specifically for W55, W57, W58, and R154 transmissions. This legendary short shifter is engineered to provide super accurate shifts, a solid mechanical feel, and a remarkable 50% reduction in throw, making it the perfect addition for both street and race applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpdated 2024 Design: \u003c\/strong\u003eThis listing features CUBE Speed's latest design improvements for an even better shifting experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e50% Reduced Shift Throw:\u003c\/strong\u003e Experience quicker gear changes, enhancing your driving dynamics and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Quality Construction:\u003c\/strong\u003e Crafted with precision for durability and reliability, ensuring long-lasting performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecise Tolerances:\u003c\/strong\u003e Engineered to tolerances down to 0.05mm, providing the best fit and shift accuracy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Shifter Pivot Mechanism:\u003c\/strong\u003e Enhances the smoothness of gear shifting, contributing to a more enjoyable driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock Height Retained:\u003c\/strong\u003e Maintains the original stock shifter height and gear knob thread pattern (12 x 1.25mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Bushings:\u003c\/strong\u003e Designed for superior performance and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eISO Certified Manufacturing:\u003c\/strong\u003e ISO 9001:2000 and ISO\/TS 16949:2002 accredited manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits the following Toyota Supra 5-speed transmissions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCelica Supra and Celica XX Mk1 (A40) 1978-1981 – all 5-speed manual\u003c\/li\u003e\n\u003cli\u003eSupra Mk2 (A60) 1981-1986 – all 5-speed manual\u003c\/li\u003e\n\u003cli\u003eSupra Mk3 (A70) 1986-1993 – all 5-speed manual\u003c\/li\u003e\n\u003cli\u003eSupra Mk4 (A80) 1993-2002 – all 5-speed manual with direct fit style shifter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso compatible with Vehicles retrofitted with W50, W55, W57, W58, or R154 transmissions from the above models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Lexus SC300, Toyota Soarer, JZX90, JZX100, JZX110, IS200, IS300, and vehicles with tripod\/remote mount shifters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Mount Requirement:\u003c\/strong\u003e Ensure that your shifter mounts directly to the transmission for compatibility; remote\/tripod-mounted shifters are not supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Shifter Spacer Plate:\u003c\/strong\u003e Required for some installations, with full fitting instructions provided.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe CUBE Speed Short Shifter focuses on reduced throw, shifter centering, and movement accuracy. Each aspect was considered to ensure confidence in every shift, minimizing the risk of accidental gear selection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"CUBE Speed","offers":[{"title":"Default Title","offer_id":49462693921089,"sku":"SSCSW58","price":230.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cube-speed-short-shifter-w50-w55-w57-w58-r154-544967.jpg?v=1727849912"},{"product_id":"cube-speed-is300-short-shifter-5-speed-w55-transmission","title":"CUBE Speed IS300 Short Shifter – 5 speed W55 Transmission","description":"\u003cp\u003eTransform your Lexus IS300 driving experience with the CUBE Speed Short Shifter, designed for Lexus IS300s equipped with the W55 5-speed transmission. Known for its precision, this short shifter reduces throw by an impressive 40%, giving you quicker, more accurate shifts, with a solid mechanical feel that is perfect for both daily driving and track use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpdated 2022 Design:\u003c\/strong\u003e Developed from over 10 years of experience in making industry-leading short shifters, this updated version offers superior quality and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e40% Reduced Shift Throw:\u003c\/strong\u003e Significantly shorter shift distances for faster gear changes and enhanced performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHighly Accurate Shifts:\u003c\/strong\u003e Engineered with tolerances down to 0.05mm, ensuring precise fitment and smooth shifts every time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock Height Retained:\u003c\/strong\u003e Keeps the original shifter height and gear knob thread pattern (12 x 1.25mm), maintaining a familiar feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Construction:\u003c\/strong\u003e The revised shifter shaft is made from 4140 high tensile steel, ensuring durability and strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVibration \u0026amp; Noise Reduction:\u003c\/strong\u003e Features an insulated short shifter lever to minimize vibration and noise transfer from the transmission.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Bushings:\u003c\/strong\u003e Built with new heavy-duty bushings for added durability and smoother operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBillet Aluminum Housing:\u003c\/strong\u003e High-quality billet aluminum housing for strength and longevity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eISO Certified Manufacturing:\u003c\/strong\u003e ISO 9001:2000 and ISO\/TS 16949:2002 accredited manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Comes with comprehensive fitting instructions, making installation straightforward even for those who aren’t professional mechanics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLexus IS300 2001-2005 equipped with the W55 5-speed manual transmission.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether you're using your IS300 for daily driving, fast road driving, or track use, this short shifter will deliver the precise, reliable shifts you need for maximum performance.  Upgrade your Lexus IS300 with the CUBE Speed Short Shifter for a more engaging and responsive driving experience!\u003c\/p\u003e","brand":"CUBE Speed","offers":[{"title":"Default Title","offer_id":49462711484737,"sku":"SSISW55","price":298.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cube-speed-is300-short-shifter-5-speed-w55-transmission-304999.jpg?v=1727849910"},{"product_id":"cube-speed-w58-shifter-solid-bush-also-suit-w55-and-w57","title":"CUBE Speed W58 Shifter Solid Bush W55 W57 W58","description":"\u003cp\u003eUpgrade your shifting precision with the CUBE Speed W58 Shifter Solid Bush, designed to replace the factory bush and dramatically improve the feel and accuracy of your gear shifts. This solution is perfect for enthusiasts seeking a more direct and reliable shifting experience without the hassle of major transmission work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved Precision:\u003c\/strong\u003e Replacing the factory metal and rubber bush with the CUBE solid bush restores shifter accuracy, making gear shifts much more precise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoose Shifter Solution:\u003c\/strong\u003e If your shifter feels loose or wobbly even when in gear, it's likely due to the failure of the stock Toyota bush. The CUBE solid bush fixes this issue, improving the overall feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCost-Effective Alternative:\u003c\/strong\u003e The CUBE solid bush is much more affordable compared to the $220 OEM bush, providing excellent value for money without compromising on quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eISO Certified Manufacturing:\u003c\/strong\u003e ISO 9001:2000 and ISO\/TS 16949:2002 accredited manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Can be installed without removing or disassembling the gearbox, saving time and effort. It's a simple, yet effective upgrade that can be done with the gearbox still in the car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIY Friendly: \u003c\/strong\u003eIncludes a kit for press-fitting the bush as well as installation instructions to guide you through the process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Toyota W58, W55, and W57 transmissions, commonly found in a variety of Toyota and Lexus vehicles. (Will not fit in \u003cspan\u003eJZX90, JZX100, JZX110, IS300, Lexus SC300 and Toyota Soarer)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWill not vehicles with tripod mount shifters which have a straight shifter lever.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Before ordering it is highly recommended to check the shape of your shifter lever under the gear lever boot\/gaitor. If your shifter lever has a “Z” or “S” bend in it our bush kit will fit (direct mount shifter), if the shifter lever is straight our bush kit will not fit (Tripod mount shifter). See photo 6 showing both direct mount and tripod mount shifters.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCUBE Speed, is obsessed with delivering the best shifting experience possible. Countless hours of research and development go into every product to make sure it meets high standards of performance. Upgrade your W55, W57, or W58 transmission today and experience smoother, more precise shifts with the CUBE Speed Solid Bush.\u003c\/p\u003e","brand":"CUBE Speed","offers":[{"title":"Default Title","offer_id":49462752018753,"sku":"SBW58S","price":90.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cube-speed-w58-shifter-solid-bush-also-suit-w55-and-w57-642518.jpg?v=1727849913"},{"product_id":"cube-speed-supra-shifter-bush-repair-kit-also-suit-w55-w58-and-r154-mk2-mk3-mk4","title":"CUBE Speed Supra Shifter Bush Repair Kit W55 W58 \u0026 R154 Mk2 Mk3 Mk4","description":"\u003cp\u003eRestore your Supra's shifting precision with the CUBE Speed Shifter Bush Repair Kit, designed to bring your worn-out stock\/factory shifter back to life. If your shifter feels sloppy or lacks precision, this kit will significantly improve your driving experience, making shifting smoother and more accurate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRejuvenated Shifting:\u003c\/strong\u003e This kit replaces all the worn-out bushes in your factory shifter, bringing back the precise, solid feel of a new shifter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeavy-Duty Bushes:\u003c\/strong\u003e The kit includes \u003cstrong\u003eheavy-duty bushes\u003c\/strong\u003e that are far stronger and more durable than the original factory components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eISO Certified Manufacturing:\u003c\/strong\u003e ISO 9001:2000 and ISO\/TS 16949:2002 accredited manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Comes with fitting instructions for easy installation, making it ideal for DIY enthusiasts or professional mechanics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eToyota \u003cspan\u003eW40, W55, W57, W58, W59 and R154\u003c\/span\u003e transmissions.\u003c\/li\u003e\n\u003cli\u003eSupra Mk2, Mk3, and Mk4 models.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDoes not fit JZX90, JZX100, JZX110.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWill not vehicles with tripod mount shifters which have a straight shifter lever.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBefore ordering it is highly recommended to check the shape of you shifter lever under the gear lever boot\/gaitor. If your shifter lever has a “Z” or “S” bend in it our bush kit will fit (direct mount shifter), if the shifter lever is straight our bush kit will not fit (Tripod mount shifter). See photo 6 showing both direct mount and tripod mount shifters.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eIf you have a W55, W57 or W58 gearbox it is highly recommended to also replace your shifter to gearbox bush which is often worn out or broken, with our high-quality solid unit. See separate listing for further details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCUBE Speed invests countless hours in the design and development process to deliver the best possible shifting experience. This kit is meticulously crafted to ensure your shifter feels better than new. Upgrade your Supra’s shifting feel with the CUBE Speed Shifter Bush Repair Kit and enjoy smoother, more accurate shifts today!\u003c\/p\u003e","brand":"CUBE Speed","offers":[{"title":"Default Title","offer_id":49462835577153,"sku":"SBW58P","price":73.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cube-speed-supra-shifter-bush-repair-kit-also-suit-w55-w58-and-r154-mk2-mk3-mk4-220213.jpg?v=1727849909"},{"product_id":"cube-speed-supra-solid-shifter-bush-for-tripod-shifter-frame-suits-w58-r154-v160-v161","title":"CUBE Speed Supra Solid Shifter Bush For Tripod Shifter Frame W58 R154 V160 V161","description":"\u003cp\u003eTransform your shifting experience with the CUBE Speed Solid Shifter Bush Kit designed for the tripod shifter frame. Over time, the factory rubber bushes can wear out, resulting in loose, vague shifts. This kit replaces the factory bushings with solid stainless steel alternatives to enhance shifter feel and control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Shifter Stability:\u003c\/strong\u003e This solid bush kit securely mounts the tripod shifter frame to your transmission, eliminating unwanted movement caused by worn factory rubber bushes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStainless Steel Construction:\u003c\/strong\u003e CNC machined from billet stainless steel for exceptional durability and longevity, ensuring consistent, crisp shifts for years to come.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Kit:\u003c\/strong\u003e Includes all necessary parts for the replacement of the lower and upper factory bushes (as shown in photo 2).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eISO Certified Manufacturing:\u003c\/strong\u003e ISO 9001:2000 and ISO\/TS 16949:2002 accredited manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIY-Friendly:\u003c\/strong\u003e Comes with full installation instructions, complete with photos, making the installation process straightforward even for enthusiasts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eToyota W58, R154, V160, and V161 Transmissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Some Toyota Supra Mk4 A80 5 speed W58 and R154. If you have a 5-speed it is recommended to do the following check before purchase, as some 5-speeds use a direct mount shifter rather than the remote shifter tripod frame which this kit suits. \u003c\/span\u003e\u003cspan\u003eCheck the shape of your shifter lever under the gear lever boot\/gaitor. If your shifter lever has bends in it this kit will not fit (direct mount shifter), if the shifter lever is straight this kit will fit (Tripod mount shifter). Alternatively check from under the car, if your shifter is mounted to a frame off the back of the gearbox our kit will fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCUBE Speed has poured countless hours into the design and development of this kit, aiming to give you the best shifting experience possible. Upgrade your Mk4 Supra’s shifting precision with CUBE Speed's Solid Shifter Bush Kit and enjoy solid, accurate shifts today!\u003c\/p\u003e","brand":"CUBE Speed","offers":[{"title":"Default Title","offer_id":49462891610433,"sku":"SBWRT","price":90.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cube-speed-supra-solid-shifter-bush-for-tripod-shifter-frame-suits-w58-r154-v160-v161-720753.jpg?v=1727849911"},{"product_id":"2002-2005-is300-2jz-vvti-ecu","title":"Royal Tuned Pre-Tuned ECU 2JZ VVTI Lexus IS300 2002-2005 - Manual Converted","description":"\u003cp data-start=\"56\" data-end=\"449\"\u003eUnlock additional performance and simplify your manual transmission conversion with the Royal Tune Pre-Tuned ECU for the 2002–2005 Lexus IS300. This ready-to-ship ECU comes pre-programmed with performance enhancements, automatic-to-manual transmission conversion, immobilizer removal, and an increased rev limiter, making it an ideal solution for modified street cars and manual swap projects.\u003c\/p\u003e\n\u003cp data-start=\"451\" data-end=\"606\"\u003eDesigned specifically for 2002–2005 Lexus IS300 models, this ECU eliminates common conversion headaches while improving drivability and engine performance.\u003c\/p\u003e\n\u003cp data-start=\"608\" data-end=\"743\"\u003e\u003cstrong data-start=\"608\" data-end=\"645\"\u003ePerformance Calibration Included:\u003c\/strong\u003e Pre-loaded performance tune designed to improve throttle response and overall driving experience.\u003c\/p\u003e\n\u003cp data-start=\"745\" data-end=\"884\"\u003e\u003cstrong data-start=\"745\" data-end=\"769\"\u003eImmobilizer Removal:\u003c\/strong\u003e Eliminates factory immobilizer restrictions, allowing the ECU to operate without matching factory key programming.\u003c\/p\u003e\n\u003cp data-start=\"886\" data-end=\"1011\"\u003e\u003cstrong data-start=\"886\" data-end=\"921\"\u003eManual Transmission Conversion:\u003c\/strong\u003e Converted from an automatic transmission ECU to support manual transmission applications.\u003c\/p\u003e\n\u003cp data-start=\"1013\" data-end=\"1131\"\u003e\u003cstrong data-start=\"1013\" data-end=\"1039\"\u003eIncreased Rev Limiter:\u003c\/strong\u003e Factory RPM limit increased from 6,700 RPM to 7,000 RPM for expanded powerband utilization.\u003c\/p\u003e\n\u003cp data-start=\"1133\" data-end=\"1235\"\u003e\u003cstrong data-start=\"1133\" data-end=\"1154\"\u003eReady to Install:\u003c\/strong\u003e Pre-programmed and ready to ship, reducing downtime and installation complexity.\u003c\/p\u003e\n\u003cp data-start=\"1237\" data-end=\"1346\"\u003e\u003cstrong data-start=\"1237\" data-end=\"1264\"\u003eIdeal for Manual Swaps:\u003c\/strong\u003e Simplifies the ECU portion of IS300 automatic-to-manual transmission conversions.\u003c\/p\u003e\n\u003cp data-start=\"1348\" data-end=\"1366\"\u003e\u003cstrong data-start=\"1348\" data-end=\"1366\"\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1368\" data-end=\"1556\"\u003e\n\u003cli data-section-id=\"5acc4z\" data-start=\"1368\" data-end=\"1399\"\u003eECU Type: OEM Lexus IS300 ECU\u003c\/li\u003e\n\u003cli data-section-id=\"1rng59t\" data-start=\"1400\" data-end=\"1447\"\u003eTune Type: Royal Tune Performance Calibration\u003c\/li\u003e\n\u003cli data-section-id=\"1om5r2m\" data-start=\"1448\" data-end=\"1485\"\u003eRev Limiter: Increased to 7,000 RPM\u003c\/li\u003e\n\u003cli data-section-id=\"1ycy3rp\" data-start=\"1486\" data-end=\"1508\"\u003eImmobilizer: Removed\u003c\/li\u003e\n\u003cli data-section-id=\"h9jixi\" data-start=\"1509\" data-end=\"1556\"\u003eTransmission Configuration: Manual Conversion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1558\" data-end=\"1577\"\u003e\u003cstrong data-start=\"1558\" data-end=\"1577\"\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1579\" data-end=\"1646\"\u003e\n\u003cli data-section-id=\"7ohxcm\" data-start=\"1579\" data-end=\"1609\"\u003eLexus IS300 Base (2002–2005)\u003c\/li\u003e\n\u003cli data-section-id=\"d2nn5j\" data-start=\"1610\" data-end=\"1646\"\u003eLexus IS300 SportCross (2002–2005)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1648\" data-end=\"1667\"\u003e\u003cstrong data-start=\"1648\" data-end=\"1667\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1669\" data-end=\"1901\"\u003e\n\u003cli data-section-id=\"19kize\" data-start=\"1669\" data-end=\"1707\"\u003eDoes NOT fit 2001 Lexus IS300 models\u003c\/li\u003e\n\u003cli data-section-id=\"q57kfr\" data-start=\"1708\" data-end=\"1762\"\u003eDesigned for 2002–2005 Lexus IS300 applications only\u003c\/li\u003e\n\u003cli data-section-id=\"1eux4iy\" data-start=\"1763\" data-end=\"1802\"\u003eProfessional installation recommended\u003c\/li\u003e\n\u003cli data-section-id=\"1ni8mys\" data-start=\"1803\" data-end=\"1847\"\u003eVerify ECU compatibility prior to purchase\u003c\/li\u003e\n\u003cli data-section-id=\"701fzz\" data-start=\"1848\" data-end=\"1901\"\u003eIntended for manual transmission converted vehicles\u003c\/li\u003e\n\u003cli data-section-id=\"701fzz\" data-start=\"1848\" data-end=\"1901\"\u003eWe can not customize this ECU as it is already pre-tuned\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"168\" data-end=\"534\"\u003e\u003cstrong data-start=\"168\" data-end=\"218\"\u003eCalifornia Emissions Disclaimer (CARB Notice):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"168\" data-end=\"534\"\u003eThis product is intended solely for off-road, race\/competition vehicles that are not registered for highway use. It is not legal for sale or use in California or in states that have adopted California emissions laws on any pollution-controlled motor vehicle driven on public streets, roads, or highways.\u003c\/p\u003e\n\u003cp data-start=\"536\" data-end=\"837\"\u003eInstallation or use of this product on a pollution-controlled vehicle may violate federal (Clean Air Act) and state laws, and can result in substantial fines and penalties imposed by the California Air Resources Board (CARB), U.S. Environmental Protection Agency (EPA), or other regulatory agencies.\u003c\/p\u003e\n\u003cp data-start=\"839\" data-end=\"1077\"\u003eBy purchasing and installing this product, the end-user assumes all responsibility for compliance with local, state, and federal emissions regulations. The seller and manufacturer disclaim all liability for improper use of this product.\u003c\/p\u003e\n\u003cp data-start=\"1903\" data-end=\"1928\"\u003e\u003cstrong data-start=\"1903\" data-end=\"1928\"\u003eWhy Choose Royal Tune\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1930\" data-end=\"2105\"\u003eRoyal Tune specializes in Toyota and Lexus ECU calibrations, delivering reliable tuning solutions that improve performance, simplify swaps, and enhance the driving experience.\u003c\/p\u003e\n\u003cp data-start=\"2107\" data-end=\"2265\"\u003eA pre-tuned Lexus IS300 ECU featuring a performance tune, immobilizer removal, 7,000 RPM rev limiter, and automatic-to-manual conversion for 2002–2005 models.\u003c\/p\u003e","brand":"Royal Tuned","offers":[{"title":"Default Title","offer_id":49688000168257,"sku":"ECU-TUNE-IS300","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/quantum-auto-2jz-vvti-ecu-tune-re-map-service-lexus-is300-2002-2005-521076.jpg?v=1737040670"},{"product_id":"2002-2005-gs300-2jz-vvti-ecu-re-map-service","title":"Royal Tuned Pre-Tuned ECU 2JZ VVTI Lexus GS300 2002-2005 - Manual Converted","description":"\u003cp data-start=\"57\" data-end=\"461\"\u003eUpgrade your Lexus GS300 with a Royal Tuned Pre-Tuned ECU, designed to deliver improved performance and simplify manual transmission conversions. This ready-to-ship ECU comes pre-programmed with a performance tune, immobilizer removal, automatic-to-manual conversion, and an increased rev limiter, making it an excellent solution for enthusiasts looking to get more from their 2JZ-GE VVT-i powered GS300.\u003c\/p\u003e\n\u003cp data-start=\"463\" data-end=\"620\"\u003eEngineered specifically for 2002–2005 Lexus GS300 models, this ECU eliminates common swap challenges while enhancing overall drivability and engine response.\u003c\/p\u003e\n\u003cp data-start=\"622\" data-end=\"745\"\u003e\u003cstrong data-start=\"622\" data-end=\"652\"\u003ePerformance Tune Included:\u003c\/strong\u003e Pre-loaded calibration designed to improve throttle response and overall engine performance.\u003c\/p\u003e\n\u003cp data-start=\"747\" data-end=\"869\"\u003e\u003cstrong data-start=\"747\" data-end=\"771\"\u003eImmobilizer Removal:\u003c\/strong\u003e Eliminates factory immobilizer restrictions, allowing operation without matching key programming.\u003c\/p\u003e\n\u003cp data-start=\"871\" data-end=\"988\"\u003e\u003cstrong data-start=\"871\" data-end=\"906\"\u003eManual Transmission Conversion:\u003c\/strong\u003e Converted from an automatic ECU to support manual transmission swap applications.\u003c\/p\u003e\n\u003cp data-start=\"990\" data-end=\"1105\"\u003e\u003cstrong data-start=\"990\" data-end=\"1016\"\u003eIncreased Rev Limiter:\u003c\/strong\u003e Raises the factory RPM limit from 6,700 RPM to 7,000 RPM, extending usable engine speed.\u003c\/p\u003e\n\u003cp data-start=\"1107\" data-end=\"1214\"\u003e\u003cstrong data-start=\"1107\" data-end=\"1137\"\u003eReady-to-Install Solution:\u003c\/strong\u003e Pre-programmed and ready to ship for a straightforward installation process.\u003c\/p\u003e\n\u003cp data-start=\"1216\" data-end=\"1320\"\u003e\u003cstrong data-start=\"1216\" data-end=\"1243\"\u003eIdeal for Manual Swaps:\u003c\/strong\u003e Simplifies the electronics portion of GS300 manual transmission conversions.\u003c\/p\u003e\n\u003cp data-start=\"1322\" data-end=\"1340\"\u003e\u003cstrong data-start=\"1322\" data-end=\"1340\"\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1342\" data-end=\"1575\"\u003e\n\u003cli data-section-id=\"1mrvbst\" data-start=\"1342\" data-end=\"1373\"\u003eECU Type: OEM Lexus GS300 ECU\u003c\/li\u003e\n\u003cli data-section-id=\"yo48pj\" data-start=\"1374\" data-end=\"1417\"\u003eEngine Compatibility: Toyota 2JZ-GE VVT-i\u003c\/li\u003e\n\u003cli data-section-id=\"rajbed\" data-start=\"1418\" data-end=\"1466\"\u003eTune Type: Royal Tuned Performance Calibration\u003c\/li\u003e\n\u003cli data-section-id=\"1om5r2m\" data-start=\"1467\" data-end=\"1504\"\u003eRev Limiter: Increased to 7,000 RPM\u003c\/li\u003e\n\u003cli data-section-id=\"1ycy3rp\" data-start=\"1505\" data-end=\"1527\"\u003eImmobilizer: Removed\u003c\/li\u003e\n\u003cli data-section-id=\"h9jixi\" data-start=\"1528\" data-end=\"1575\"\u003eTransmission Configuration: Manual Conversion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1577\" data-end=\"1596\"\u003e\u003cstrong data-start=\"1577\" data-end=\"1596\"\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1598\" data-end=\"1628\"\u003e\n\u003cli data-section-id=\"1phkztk\" data-start=\"1598\" data-end=\"1628\"\u003eLexus GS300 Base (2002–2005)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1630\" data-end=\"1649\"\u003e\u003cstrong data-start=\"1630\" data-end=\"1649\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1651\" data-end=\"1907\"\u003e\n\u003cli data-section-id=\"1gnjiq6\" data-start=\"1651\" data-end=\"1694\"\u003eDoes NOT fit 1998–2001 Lexus GS300 models\u003c\/li\u003e\n\u003cli data-section-id=\"p9limw\" data-start=\"1695\" data-end=\"1758\"\u003eDesigned specifically for 2002–2005 2JZ-GE VVT-i applications\u003c\/li\u003e\n\u003cli data-section-id=\"1eux4iy\" data-start=\"1759\" data-end=\"1798\"\u003eProfessional installation recommended\u003c\/li\u003e\n\u003cli data-section-id=\"1i0o75\" data-start=\"1799\" data-end=\"1853\"\u003eVerify ECU part number compatibility before ordering\u003c\/li\u003e\n\u003cli data-section-id=\"701fzz\" data-start=\"1854\" data-end=\"1907\"\u003eIntended for manual transmission converted vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"168\" data-end=\"534\"\u003e\u003cstrong data-start=\"168\" data-end=\"218\"\u003eCalifornia Emissions Disclaimer (CARB Notice):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"168\" data-end=\"534\"\u003eThis product is intended solely for off-road, race\/competition vehicles that are not registered for highway use. It is not legal for sale or use in California or in states that have adopted California emissions laws on any pollution-controlled motor vehicle driven on public streets, roads, or highways.\u003c\/p\u003e\n\u003cp data-start=\"536\" data-end=\"837\"\u003eInstallation or use of this product on a pollution-controlled vehicle may violate federal (Clean Air Act) and state laws, and can result in substantial fines and penalties imposed by the California Air Resources Board (CARB), U.S. Environmental Protection Agency (EPA), or other regulatory agencies.\u003c\/p\u003e\n\u003cp data-start=\"839\" data-end=\"1077\"\u003eBy purchasing and installing this product, the end-user assumes all responsibility for compliance with local, state, and federal emissions regulations. The seller and manufacturer disclaim all liability for improper use of this product.\u003c\/p\u003e\n\u003cp data-start=\"1909\" data-end=\"1935\"\u003e\u003cstrong data-start=\"1909\" data-end=\"1935\"\u003eWhy Choose Royal Tuned\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1937\" data-end=\"2121\"\u003eRoyal Tuned specializes in Toyota and Lexus ECU solutions, providing proven calibrations that improve performance, simplify swaps, and enhance reliability for enthusiasts and builders.\u003c\/p\u003e\n\u003cp data-start=\"2123\" data-end=\"2288\"\u003eA pre-tuned Lexus GS300 ECU featuring a performance calibration, immobilizer removal, 7,000 RPM rev limiter, and automatic-to-manual conversion for 2002–2005 models.\u003c\/p\u003e","brand":"Royal Tuned","offers":[{"title":"Default Title","offer_id":49708556419393,"sku":"GS300-ECU-Tune","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/Royal-Tuned-2jz-vvti-ecu-tune-re-map-service-lexus-gs300-2002-2005-972172.jpg?v=1781232910"},{"product_id":"xcessive-manufacturing-urethane-motor-mount-lexus-is300-2001-2005-copy","title":"Xcessive Manufacturing Urethane Motor Mount Lexus IS200 SXE10","description":"\u003cp\u003eReplace your worn or soft stock motor mounts with Xcessive Manufacturing Urethane Motor Mounts, engineered for superior performance and durability. These mounts are a direct-fit upgrade for Lexus IS200 models, designed to handle more power while reducing engine movement, making them ideal for enthusiasts and performance-focused drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Durability\u003c\/strong\u003e: Crafted with precision CNC-cut steel bases and pressure-cast aluminum upper units for superior strength and weather resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Urethane Bushings\u003c\/strong\u003e: These are equipped with standard 80A (Orange) bushings for excellent performance and durability. Softer 65A (Yellow) bushings are available as an option. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduced Engine Movement\u003c\/strong\u003e: The full floating omnidirectional dampening system minimizes engine vibration, unlike \"puck\" mounts that allow metal-on-metal contact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Driving Experience\u003c\/strong\u003e: Reduces drivetrain flex, improving throttle response and power transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Direct-fit replacement for stock mounts on the 1999–2005 Lexus IS300 (JCE10 chassis).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIS200 (SXE10 Altezza).\u003c\/li\u003e\n\u003cli\u003eDoes not fit USDM Lexus IS300 (2001–2005) – JCE10.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your Lexus IS200 with Xcessive Manufacturing Urethane Motor Mounts—built to enhance performance, stability, and durability for high-powered applications. Order today and experience the difference!\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Orange 80A (Firmer)","offer_id":49723416641857,"sku":"T-SXE10-UMM-S22","price":232.0,"currency_code":"USD","in_stock":true},{"title":"Yellow 65A (Softer)","offer_id":49723416674625,"sku":"T-SXE10-UMM-S22-2","price":232.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/xcessive-manufacturing-urethane-motor-mount-lexus-is200-sxe10-938733.jpg?v=1732739106"},{"product_id":"megan-racing-engine-mounts-lexus-gs300-1998-2005","title":"Megan Racing Engine\/Motor Mounts Lexus GS300 1998-2005","description":"\u003cp\u003eMegan Racing presents Hardened Rubber Motor Mounts, a performance solution designed to replace the factory soft rubber bushings that deteriorate over time from flexing, vibration, and weather exposure. Once worn, stock bushings can tear and risk serious engine or transmission damage. These reinforced motor mounts deliver improved durability and performance by transferring more energy to the wheels instead of absorbing it through soft rubber. Perfect for enthusiasts, they strike the balance between performance and daily drivability.\u003c\/p\u003e\n\u003cp data-end=\"1348\" data-start=\"1248\"\u003e\u003cstrong data-end=\"1273\" data-start=\"1248\"\u003eDurable Construction:\u003c\/strong\u003e Reinforced rubber mounts built to withstand performance driving demands.\u003c\/p\u003e\n\u003cp data-end=\"1461\" data-start=\"1351\"\u003e\u003cstrong data-end=\"1376\" data-start=\"1351\"\u003e70A Durometer Rating:\u003c\/strong\u003e Strikes a balance between performance and comfort, minimizing excessive vibration.\u003c\/p\u003e\n\u003cp data-end=\"1566\" data-start=\"1464\"\u003e\u003cstrong data-end=\"1492\" data-start=\"1464\"\u003eImproved Power Transfer:\u003c\/strong\u003e Less energy absorbed by soft rubber means more delivered to the wheels.\u003c\/p\u003e\n\u003cp data-end=\"1653\" data-start=\"1569\"\u003e\u003cstrong data-end=\"1592\" data-start=\"1569\"\u003eDirect Replacement:\u003c\/strong\u003e Designed specifically for the GS300 for easy installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet of 2:\u003c\/strong\u003e Each order includes a set of two motor mounts, ensuring comprehensive support for your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: \u003c\/strong\u003eMRS-LX-0340\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLexus GS300-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProposition 65 Warning:\u003c\/strong\u003e For your safety, be aware of the Proposition 65 warning, indicating the presence of materials that may cause cancer and reproductive harm. Visit \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ehttps:\/\/www.P65Warnings.ca.gov\u003c\/a\u003e for detailed information.\u003c\/p\u003e\n\u003cp data-end=\"1773\" data-start=\"1446\"\u003eUpgrade your Lexus GS300 with Megan Racing Hardened Rubber Motor Mounts to enhance durability, reduce wear, and unlock improved power transfer to the wheels. Whether for spirited driving or motorsports, these mounts are designed for enthusiasts who demand more from their vehicles.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":50767426421057,"sku":"MRS-LX-0340","price":161.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/products\/megan-racing-engine-mounts-lexus-is300-2001-2005-851812.jpg?v=1707777704"},{"product_id":"cxracing-r154-transmission-mount-for-1997-2005-lexus-gs300-2jz-gte","title":"CXRacing R154 Transmission Mount For 1997–2005 Lexus GS300 2JZ-GTE","description":"\u003cp data-start=\"72\" data-end=\"356\"\u003eUpgrade your Lexus GS300 drivetrain with the CXRacing R154 Transmission Mount, designed for precision fitment, strength, and reliability. Built for manual transmission swaps, this mount ensures solid drivetrain alignment and long-lasting support for high-performance 2JZ-GTE setups.\u003c\/p\u003e\n\u003cp data-start=\"358\" data-end=\"505\"\u003e\u003cstrong data-start=\"358\" data-end=\"386\"\u003eHeavy-Duty Construction:\u003c\/strong\u003e Crafted from 7-gauge (0.18\") thick stainless steel for maximum strength and durability under high-torque conditions.\u003c\/p\u003e\n\u003cp data-start=\"507\" data-end=\"657\"\u003e\u003cstrong data-start=\"507\" data-end=\"529\"\u003eReinforced Design:\u003c\/strong\u003e Integrated brace offers additional rigidity and stability, perfect for handling the demands of high-powered R154 conversions.\u003c\/p\u003e\n\u003cp data-start=\"659\" data-end=\"791\"\u003e\u003cstrong data-start=\"659\" data-end=\"682\"\u003eAdjustable Fitment:\u003c\/strong\u003e Slotted bolt holes provide flexibility for fine-tuned alignment, ensuring secure and precise installation.\u003c\/p\u003e\n\u003cp data-start=\"793\" data-end=\"956\"\u003e\u003cstrong data-start=\"793\" data-end=\"824\"\u003eDirect Bolt-On Application:\u003c\/strong\u003e Designed specifically for 1997–2005 Lexus GS300 chassis with 2JZ-GTE and R154 manual transmission. Does NOT fit automatic models.\u003c\/p\u003e\n\u003cp data-start=\"958\" data-end=\"1079\"\u003e\u003cstrong data-start=\"958\" data-end=\"978\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003cbr data-start=\"978\" data-end=\"981\"\u003eChassis: 1997–2005 Lexus GS300\u003cbr data-start=\"1011\" data-end=\"1014\"\u003eEngine: Toyota 2JZ-GTE\u003cbr data-start=\"1036\" data-end=\"1039\"\u003eTransmission: R154 Manual Transmission\u003c\/p\u003e\n\u003cp data-start=\"1081\" data-end=\"1132\"\u003e\u003cstrong data-start=\"1081\" data-end=\"1101\"\u003eWhat’s Included:\u003c\/strong\u003e\u003cbr data-start=\"1101\" data-end=\"1104\"\u003e1x R154 Transmission Mount\u003c\/p\u003e\n\u003cp data-start=\"1134\" data-end=\"1341\"\u003e\u003cstrong data-start=\"1134\" data-end=\"1144\"\u003eNotes: \u003c\/strong\u003eThis listing includes the transmission mount ONLY. Other parts shown are for demonstration and are NOT included. \u003c\/p\u003e\n\u003cp data-start=\"1134\" data-end=\"1341\"\u003e\u003cstrong data-start=\"1343\" data-end=\"1367\"\u003eWhy Choose CXRacing?\u003c\/strong\u003e\u003cbr data-start=\"1367\" data-end=\"1370\"\u003eDeveloped and tested in the USA, CXRacing components deliver superior performance, precision, and reliability. Ideal for GS300 owners performing manual swaps seeking strength and factory-quality fitment.\u003c\/p\u003e","brand":"CXRacing","offers":[{"title":"Default Title","offer_id":50950350635329,"sku":"TM-R154-GS300","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cxracing-r154-transmission-mount-for-19972005-lexus-gs300-2jz-gte-1192488.jpg?v=1761798883"},{"product_id":"cxracing-automatic-transmission-mount-1997-2005-lexus-gs300-2jz-gte","title":"CXRacing Automatic Transmission Mount – 1997–2005 Lexus GS300 2JZ-GTE","description":"\u003cp data-start=\"77\" data-end=\"376\"\u003eUpgrade your Lexus GS300 drivetrain with the CXRacing Automatic Transmission Mount, engineered for strength, stability, and precise fitment. Designed specifically for automatic transmission setups, this mount ensures proper drivetrain support and long-term reliability for 2JZ-GTE-equipped GS300s.\u003c\/p\u003e\n\u003cp data-start=\"378\" data-end=\"526\"\u003e\u003cstrong data-start=\"378\" data-end=\"406\"\u003eHeavy-Duty Construction:\u003c\/strong\u003e Crafted from 7-gauge (0.18\") thick stainless steel for superior durability and strength under high-torque conditions.\u003c\/p\u003e\n\u003cp data-start=\"528\" data-end=\"662\"\u003e\u003cstrong data-start=\"528\" data-end=\"550\"\u003eReinforced Design:\u003c\/strong\u003e Built with an integrated brace to provide maximum stability and support for the automatic transmission setup.\u003c\/p\u003e\n\u003cp data-start=\"664\" data-end=\"787\"\u003e\u003cstrong data-start=\"664\" data-end=\"687\"\u003eAdjustable Fitment:\u003c\/strong\u003e Features slotted bolt holes for fine-tuned adjustment, ensuring secure and accurate installation.\u003c\/p\u003e\n\u003cp data-start=\"789\" data-end=\"959\"\u003e\u003cstrong data-start=\"789\" data-end=\"815\"\u003eDirect Bolt-On Design:\u003c\/strong\u003e Fits 1997–2005 Lexus GS300 chassis equipped with the Toyota 2JZ-GTE engine and automatic transmission. Does NOT fit R154 manual transmission.\u003c\/p\u003e\n\u003cp data-start=\"961\" data-end=\"1067\"\u003e\u003cstrong data-start=\"961\" data-end=\"981\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003cbr data-start=\"981\" data-end=\"984\"\u003eChassis: 1997–2005 Lexus GS300\u003cbr data-start=\"1014\" data-end=\"1017\"\u003eEngine: Toyota 2JZ-GTE\u003cbr data-start=\"1039\" data-end=\"1042\"\u003eTransmission: Automatic\u003c\/p\u003e\n\u003cp data-start=\"1069\" data-end=\"1125\"\u003e\u003cstrong data-start=\"1069\" data-end=\"1089\"\u003eWhat’s Included:\u003c\/strong\u003e\u003cbr data-start=\"1089\" data-end=\"1092\"\u003e1x Automatic Transmission Mount\u003c\/p\u003e\n\u003cp data-start=\"1127\" data-end=\"1327\"\u003e\u003cstrong data-start=\"1127\" data-end=\"1137\"\u003eNotes: \u003c\/strong\u003eThis listing is for the transmission mount ONLY. Engine mounts, oil pan, headers, and Y-pipes are NOT included.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-start=\"1329\" data-end=\"1570\"\u003e\u003cstrong data-start=\"1329\" data-end=\"1353\"\u003eWhy Choose CXRacing?\u003c\/strong\u003e\u003cbr data-start=\"1353\" data-end=\"1356\"\u003eDeveloped and tested in the USA, CXRacing components deliver precision fitment, robust construction, and reliable performance. Perfect for GS300 owners upgrading or maintaining their automatic 2JZ-GTE drivetrain.\u003c\/p\u003e","brand":"CXRacing","offers":[{"title":"Default Title","offer_id":50950353944897,"sku":"TM-AUTO-2JZGTE-GS300","price":192.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cxracing-automatic-transmission-mount-19972005-lexus-gs300-2jz-gte-1533084.jpg?v=1761798883"},{"product_id":"cxracing-ls-engine-t56-transmission-mount-kit-for-lexus-91-00-sc300-lsx","title":"CXRacing LS Engine T56 Transmission Mount Kit For Lexus 91-00 SC300 LSX","description":"\u003cp data-start=\"91\" data-end=\"374\"\u003eUpgrade your 1991–2000 Lexus SC300 with the CXRacing LS1 Engine Mount and T56 Transmission Mount Kit — engineered for precise fitment, strength, and durability. Designed specifically for LS1 swap conversions, this kit ensures your drivetrain sits securely and performs at its best.\u003c\/p\u003e\n\u003cp data-start=\"376\" data-end=\"530\"\u003e\u003cstrong data-start=\"376\" data-end=\"404\"\u003eHeavy-Duty Construction: \u003c\/strong\u003eBuilt from 7-gauge (0.18\") thick stainless steel with reinforced bracing for superior strength and long-term reliability.\u003c\/p\u003e\n\u003cp data-start=\"532\" data-end=\"652\"\u003e\u003cstrong data-start=\"532\" data-end=\"555\"\u003eAdjustable Fitment: \u003c\/strong\u003eIncludes slotted bolt holes for easy installation and perfect alignment during your LS swap.\u003c\/p\u003e\n\u003cp data-start=\"654\" data-end=\"802\"\u003e\u003cstrong data-start=\"654\" data-end=\"686\"\u003ePolyurethane Bushing Mounts: \u003c\/strong\u003eReduce vibration and harshness while maintaining a solid connection between engine, transmission, and chassis.\u003c\/p\u003e\n\u003cp data-start=\"804\" data-end=\"912\"\u003e\u003cstrong data-start=\"804\" data-end=\"830\"\u003ePatented Mount Design: \u003c\/strong\u003eEngineered for excellent strength, stability, and proper drivetrain geometry.\u003c\/p\u003e\n\u003cp data-start=\"914\" data-end=\"936\"\u003e\u003cstrong data-start=\"914\" data-end=\"934\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"937\" data-end=\"1055\"\u003e\n\u003cli data-start=\"937\" data-end=\"956\"\u003e\n\u003cp data-start=\"939\" data-end=\"956\"\u003eMake: Lexus\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"957\" data-end=\"977\"\u003e\n\u003cp data-start=\"959\" data-end=\"977\"\u003eModel: SC300\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"978\" data-end=\"1002\"\u003e\n\u003cp data-start=\"980\" data-end=\"1002\"\u003eYears: 1991–2000\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1003\" data-end=\"1022\"\u003e\n\u003cp data-start=\"1005\" data-end=\"1022\"\u003eEngine: LS1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1023\" data-end=\"1055\"\u003e\n\u003cp data-start=\"1025\" data-end=\"1055\"\u003eTransmission: T56 Manual\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1057\" data-end=\"1079\"\u003e\u003cstrong data-start=\"1057\" data-end=\"1077\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1080\" data-end=\"1133\"\u003e\n\u003cli data-start=\"1080\" data-end=\"1107\"\u003e\n\u003cp data-start=\"1082\" data-end=\"1107\"\u003e1x Set of Engine Mounts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1108\" data-end=\"1133\"\u003e\n\u003cp data-start=\"1110\" data-end=\"1133\"\u003e1x Transmission Mount\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1135\" data-end=\"1291\"\u003e\u003cstrong data-start=\"1135\" data-end=\"1145\"\u003eNotes:\u003c\/strong\u003e\u003cbr data-start=\"1145\" data-end=\"1148\"\u003eOil pan, headers, and Y-pipes not included. Designed for USDM Left-Hand-Drive (LHD) models only; RHD models may require modification.\u003c\/p\u003e\n\u003cp data-start=\"1293\" data-end=\"1539\"\u003e\u003cstrong data-start=\"1293\" data-end=\"1317\"\u003eWhy Choose CXRacing?\u003c\/strong\u003e\u003cbr data-start=\"1317\" data-end=\"1320\"\u003eCXRacing products are designed and developed in the USA for superior performance, fitment, and reliability. Perfect for enthusiasts seeking a proven LS swap solution that combines durability and precision engineering.\u003c\/p\u003e","brand":"CXRacing","offers":[{"title":"Default Title","offer_id":50954438771009,"sku":"ESK-TM-LS-SC300","price":1166.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cxracing-ls-engine-t56-transmission-mount-kit-for-lexus-91-00-sc300-lsx-6899695.jpg?v=1762060275"},{"product_id":"cxracing-ls1-engine-mount-kit-91-00-lexus-sc300-lsx-swap","title":"CXRacing LS1 Engine Mount Kit For 1991–2000 Lexus SC300 LSX Swap","description":"\u003cp data-start=\"66\" data-end=\"286\"\u003eUpgrade your Lexus SC300 with the CXRacing LS1 Engine Mount Kit, designed specifically for LS1 engine swaps. This kit provides a precise fit, superior strength, and long-term durability for your high-performance build.\u003c\/p\u003e\n\u003cp data-start=\"288\" data-end=\"440\"\u003e\u003cstrong data-start=\"288\" data-end=\"316\"\u003eHeavy-Duty Construction: \u003c\/strong\u003eBuilt from 7-gauge (0.18\") thick stainless steel with added bracing for exceptional support and reliability under load.\u003c\/p\u003e\n\u003cp data-start=\"442\" data-end=\"566\"\u003e\u003cstrong data-start=\"442\" data-end=\"465\"\u003eAdjustable Fitment: \u003c\/strong\u003eFeatures slotted bolt holes for easy installation and perfect alignment during the swap process.\u003c\/p\u003e\n\u003cp data-start=\"568\" data-end=\"711\"\u003e\u003cstrong data-start=\"568\" data-end=\"600\"\u003ePolyurethane Bushing Mounts: \u003c\/strong\u003eReduce vibration and engine movement while maintaining a solid connection between the engine and chassis.\u003c\/p\u003e\n\u003cp data-start=\"713\" data-end=\"857\"\u003e\u003cstrong data-start=\"713\" data-end=\"739\"\u003ePatented Mount Design: \u003c\/strong\u003eEngineered for excellent strength and drivetrain stability, ensuring consistent performance and proper alignment.\u003c\/p\u003e\n\u003cp data-start=\"859\" data-end=\"881\"\u003e\u003cstrong data-start=\"859\" data-end=\"879\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"882\" data-end=\"967\"\u003e\n\u003cli data-start=\"882\" data-end=\"901\"\u003e\n\u003cp data-start=\"884\" data-end=\"901\"\u003eMake: Lexus\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"902\" data-end=\"922\"\u003e\n\u003cp data-start=\"904\" data-end=\"922\"\u003eModel: SC300\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"923\" data-end=\"947\"\u003e\n\u003cp data-start=\"925\" data-end=\"947\"\u003eYears: 1991–2000\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"948\" data-end=\"967\"\u003e\n\u003cp data-start=\"950\" data-end=\"967\"\u003eEngine: LS1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"969\" data-end=\"991\"\u003eWhat’s Included:\u003c\/p\u003e\n\u003cul data-start=\"992\" data-end=\"1019\"\u003e\n\u003cli data-start=\"992\" data-end=\"1019\"\u003e\n\u003cp data-start=\"994\" data-end=\"1019\"\u003e1x Set of Engine Mounts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1021\" data-end=\"1215\"\u003eNotes: This listing is for engine mounts only. Transmission mount, oil pan, headers, and Y-pipes are not included. Designed for USDM Left-Hand-Drive (LHD) models; RHD may require modification.\u003c\/p\u003e\n\u003cp data-start=\"1217\" data-end=\"1470\"\u003e\u003cstrong data-start=\"1217\" data-end=\"1241\"\u003eWhy Choose CXRacing?\u003c\/strong\u003e\u003cbr data-start=\"1241\" data-end=\"1244\"\u003eCXRacing designs and tests every product in the USA to ensure unmatched fitment, strength, and performance. Ideal for enthusiasts looking for a proven LS1 swap solution built to handle the demands of high-power applications.\u003c\/p\u003e","brand":"CXRacing","offers":[{"title":"Default Title","offer_id":50954536649025,"sku":"ESK-LS-SC300-KIT","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cxracing-ls1-engine-mount-kit-for-19912000-lexus-sc300-lsx-swap-9915168.jpg?v=1762060276"},{"product_id":"cxracing-t56-transmission-mount-1991-2000-lexus-sc300-ls1-swap","title":"CXRacing T56 Transmission Mount 1991–2000 Lexus SC300 LS1 Swap","description":"\u003cp data-start=\"68\" data-end=\"209\"\u003eUpgrade your LS1 swap with the CXRacing T56 Transmission Mount, engineered for durability, precise fitment, and high-performance stability.\u003c\/p\u003e\n\u003cp data-start=\"211\" data-end=\"352\"\u003e\u003cstrong data-start=\"211\" data-end=\"239\"\u003eHeavy-Duty Construction:\u003c\/strong\u003e\u003cbr data-start=\"239\" data-end=\"242\"\u003eBuilt from 7-gauge (0.18\") thick stainless steel with reinforced bracing to handle high-torque applications.\u003c\/p\u003e\n\u003cp data-start=\"354\" data-end=\"477\"\u003e\u003cstrong data-start=\"354\" data-end=\"377\"\u003eAdjustable Fitment:\u003c\/strong\u003e\u003cbr data-start=\"377\" data-end=\"380\"\u003eFeatures slotted bolt holes for precise installation and alignment with your LS1 and T56 setup.\u003c\/p\u003e\n\u003cp data-start=\"479\" data-end=\"501\"\u003e\u003cstrong data-start=\"479\" data-end=\"499\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"502\" data-end=\"613\"\u003e\n\u003cli data-start=\"502\" data-end=\"521\"\u003e\n\u003cp data-start=\"504\" data-end=\"521\"\u003eMake: Lexus\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"522\" data-end=\"542\"\u003e\n\u003cp data-start=\"524\" data-end=\"542\"\u003eModel: SC300\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"543\" data-end=\"567\"\u003e\n\u003cp data-start=\"545\" data-end=\"567\"\u003eYears: 1991–2000\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"568\" data-end=\"587\"\u003e\n\u003cp data-start=\"570\" data-end=\"587\"\u003eEngine: LS1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"588\" data-end=\"613\"\u003e\n\u003cp data-start=\"590\" data-end=\"613\"\u003eTransmission: T56\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"615\" data-end=\"637\"\u003e\u003cstrong data-start=\"615\" data-end=\"635\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"638\" data-end=\"663\"\u003e\n\u003cli data-start=\"638\" data-end=\"663\"\u003e\n\u003cp data-start=\"640\" data-end=\"663\"\u003e1x Transmission Mount\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"665\" data-end=\"862\"\u003eNotes: This listing is for the transmission mount only. Engine mount, oil pan, headers, and Y-pipes are not included. Designed for USDM Left-Hand-Drive (LHD) models; RHD may require modification.\u003c\/p\u003e\n\u003cp data-start=\"864\" data-end=\"1079\"\u003e\u003cstrong data-start=\"864\" data-end=\"888\"\u003eWhy Choose CXRacing?\u003c\/strong\u003e\u003cbr data-start=\"888\" data-end=\"891\"\u003eCXRacing designs and tests all components in the USA for precision fitment, superior strength, and reliable performance. Perfect for LS1 swap builds that demand stability and durability.\u003c\/p\u003e","brand":"CXRacing","offers":[{"title":"Default Title","offer_id":50954626203969,"sku":null,"price":241.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cxracing-t56-transmission-mount-19912000-lexus-sc300-ls1-swap-3635272.jpg?v=1762060274"},{"product_id":"cxracing-ls1-engine-t56-transmission-mount-oil-pan-91-00-lexus-sc300-lsx-swap","title":"CXRacing LS1 Engine T56 Transmission Mount Oil Pan 91-00 Lexus SC300 LSX Swap","description":"\u003cp data-start=\"92\" data-end=\"258\"\u003eUpgrade your LS1 swap with the CXRacing Engine Mount + Transmission Mount + Oil Pan Kit, engineered for maximum strength, precise fitment, and reliable performance.\u003c\/p\u003e\n\u003cp data-start=\"260\" data-end=\"510\"\u003e\u003cstrong data-start=\"260\" data-end=\"289\"\u003eHeavy-Duty Engine Mounts: \u003c\/strong\u003eBuilt from 7-gauge (0.18\") thick stainless steel with reinforced bracing for superior support. Polyurethane bushings provide durability and vibration reduction. Patented motor mount design ensures excellent strength.\u003c\/p\u003e\n\u003cp data-start=\"512\" data-end=\"648\"\u003e\u003cstrong data-start=\"512\" data-end=\"546\"\u003eAdjustable Transmission Mount: \u003c\/strong\u003eFeatures slotted bolt holes for precise T56 alignment and stability during high-torque operation.\u003c\/p\u003e\n\u003cp data-start=\"650\" data-end=\"778\"\u003e\u003cstrong data-start=\"650\" data-end=\"671\"\u003eMid-Sump Oil Pan: \u003c\/strong\u003eAluminum construction with integrated oil pickup. Holds 5.5 QT of oil for reliable engine lubrication.\u003c\/p\u003e\n\u003cp data-start=\"780\" data-end=\"802\"\u003e\u003cstrong data-start=\"780\" data-end=\"800\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"803\" data-end=\"914\"\u003e\n\u003cli data-start=\"803\" data-end=\"822\"\u003e\n\u003cp data-start=\"805\" data-end=\"822\"\u003eMake: Lexus\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"823\" data-end=\"843\"\u003e\n\u003cp data-start=\"825\" data-end=\"843\"\u003eModel: SC300\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"844\" data-end=\"868\"\u003e\n\u003cp data-start=\"846\" data-end=\"868\"\u003eYears: 1991–2000\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"869\" data-end=\"888\"\u003e\n\u003cp data-start=\"871\" data-end=\"888\"\u003eEngine: LS1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"889\" data-end=\"914\"\u003e\n\u003cp data-start=\"891\" data-end=\"914\"\u003eTransmission: T56\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"916\" data-end=\"938\"\u003e\u003cstrong data-start=\"916\" data-end=\"936\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"939\" data-end=\"1045\"\u003e\n\u003cli data-start=\"939\" data-end=\"966\"\u003e\n\u003cp data-start=\"941\" data-end=\"966\"\u003e1x LS1 Engine Mount Set\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"967\" data-end=\"996\"\u003e\n\u003cp data-start=\"969\" data-end=\"996\"\u003e1x T56 Transmission Mount\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"997\" data-end=\"1045\"\u003e\n\u003cp data-start=\"999\" data-end=\"1045\"\u003e1x Mid-Sump Aluminum Oil Pan with Oil Pickup\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1047\" data-end=\"1171\"\u003eNotes: Headers and Y-pipes are not included. Designed for USDM Left-Hand-Drive (LHD) models; RHD may require modification.\u003c\/p\u003e\n\u003cp data-start=\"1173\" data-end=\"1390\"\u003e\u003cstrong data-start=\"1173\" data-end=\"1197\"\u003eWhy Choose CXRacing?\u003c\/strong\u003e\u003cbr data-start=\"1197\" data-end=\"1200\"\u003eCXRacing products are developed and tested in the USA for precision fitment, durability, and maximum performance. Ideal for LS1 swap enthusiasts seeking reliable and strong engine support.\u003c\/p\u003e","brand":"CXRacing","offers":[{"title":"Default Title","offer_id":50954651828545,"sku":"ESK-TM-OP-LS-SC300","price":993.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cxracing-ls1-engine-t56-transmission-mount-oil-pan-91-00-lexus-sc300-lsx-swap-1351251.jpg?v=1762060275"},{"product_id":"cxracing-ls1-header-y-pipe-kit-for-1991-2000-lexus-sc300-lsx","title":"CXRacing LS1 Header Y Pipe Kit For 1991–2000 Lexus SC300 LSX","description":"\u003cp data-start=\"55\" data-end=\"228\"\u003eUpgrade your LS1 swap with CXRacing’s high-performance stainless steel headers, designed for maximum flow, durability, and a precise fit for 1991–2000 Lexus SC300 chassis.\u003c\/p\u003e\n\u003cp data-start=\"230\" data-end=\"351\"\u003e\u003cstrong data-start=\"230\" data-end=\"259\"\u003eHigh-Performance Headers: \u003c\/strong\u003e1.75\" equal-length primary runners optimize exhaust flow for improved power and torque.\u003c\/p\u003e\n\u003cp data-start=\"353\" data-end=\"481\"\u003e\u003cstrong data-start=\"353\" data-end=\"381\"\u003eStainless Steel Y-Pipes: \u003c\/strong\u003e3\" equal-length exhaust Y-pipes fit the stock location exhaust system for seamless integration.\u003c\/p\u003e\n\u003cp data-start=\"483\" data-end=\"592\"\u003e\u003cstrong data-start=\"483\" data-end=\"504\"\u003e3\" Vband Outlets: \u003c\/strong\u003eProvides a secure, leak-free connection to aftermarket turbo or exhaust components.\u003c\/p\u003e\n\u003cp data-start=\"594\" data-end=\"616\"\u003e\u003cstrong data-start=\"594\" data-end=\"614\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"617\" data-end=\"728\"\u003e\n\u003cli data-start=\"617\" data-end=\"636\"\u003e\n\u003cp data-start=\"619\" data-end=\"636\"\u003eMake: Lexus\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"637\" data-end=\"657\"\u003e\n\u003cp data-start=\"639\" data-end=\"657\"\u003eModel: SC300\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"658\" data-end=\"682\"\u003e\n\u003cp data-start=\"660\" data-end=\"682\"\u003eYears: 1991–2000\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"683\" data-end=\"702\"\u003e\n\u003cp data-start=\"685\" data-end=\"702\"\u003eEngine: LS1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"703\" data-end=\"728\"\u003e\n\u003cp data-start=\"705\" data-end=\"728\"\u003eTransmission: T56\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"730\" data-end=\"752\"\u003e\u003cstrong data-start=\"730\" data-end=\"750\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"753\" data-end=\"802\"\u003e\n\u003cli data-start=\"753\" data-end=\"779\"\u003e\n\u003cp data-start=\"755\" data-end=\"779\"\u003e1x Header Downpipe Kit\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"780\" data-end=\"802\"\u003e\n\u003cp data-start=\"782\" data-end=\"802\"\u003e4x 3\" Vband Clamps\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"804\" data-end=\"970\"\u003eNotes: This kit is for headers only. Engine\/transmission mounts and oil pan are not included. Designed for USDM Left-Hand-Drive (LHD); RHD may require modification.\u003c\/p\u003e\n\u003cp data-start=\"972\" data-end=\"1156\"\u003e\u003cstrong data-start=\"972\" data-end=\"996\"\u003eWhy Choose CXRacing?\u003c\/strong\u003e\u003cbr data-start=\"996\" data-end=\"999\"\u003eCXRacing products are engineered and tested in the USA for high performance, durability, and precision fitment, making them ideal for LS1 swap enthusiasts.\u003c\/p\u003e","brand":"CXRacing","offers":[{"title":"Default Title","offer_id":50954687185217,"sku":null,"price":886.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/cxracing-ls1-header-y-pipe-kit-for-19912000-lexus-sc300-lsx-1368126.jpg?v=1762060275"},{"product_id":"lexus-sc300-sc400-handbrake-assembly-tan-used","title":"Lexus SC300 \/ SC400 OEM Handbrake Assembly (Used)","description":"\u003cp data-start=\"119\" data-end=\"396\"\u003eUpgrade your manual swap project with this used tan handbrake assembly, compatible with GS300\/GS400 manual conversions. While there are visible blemishes, the assembly is fully functional and includes all necessary components for installation. Units will be shipped randomly.\u003c\/p\u003e\n\u003cp data-start=\"398\" data-end=\"417\"\u003e\u003cstrong data-start=\"398\" data-end=\"415\"\u003eComplete Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"418\" data-end=\"509\"\u003e\n\u003cli data-start=\"418\" data-end=\"463\"\u003e\n\u003cp data-start=\"420\" data-end=\"463\"\u003eIncludes SC 2-1 cable connector and cable\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"464\" data-end=\"509\"\u003e\n\u003cp data-start=\"466\" data-end=\"509\"\u003eReady to install for manual swap projects\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"511\" data-end=\"527\"\u003e\u003cstrong data-start=\"511\" data-end=\"525\"\u003eCondition:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"528\" data-end=\"586\"\u003e\n\u003cli data-start=\"528\" data-end=\"564\"\u003e\n\u003cp data-start=\"530\" data-end=\"564\"\u003eUsed, cosmetic blemishes present\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"565\" data-end=\"586\"\u003e\n\u003cp data-start=\"567\" data-end=\"586\"\u003eFully operational\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"588\" data-end=\"610\"\u003e\u003cstrong data-start=\"588\" data-end=\"608\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"613\" data-end=\"641\"\u003eLexus SC300 \/ SC400 (Used)\u003c\/li\u003e\n\u003cli data-start=\"644\" data-end=\"684\"\u003eGS300 \/ GS400 manual swap applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"686\" data-end=\"698\"\u003e\u003cstrong data-start=\"686\" data-end=\"696\"\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"699\" data-end=\"763\"\u003e\n\u003cli data-start=\"699\" data-end=\"763\"\u003e\n\u003cp data-start=\"701\" data-end=\"763\"\u003eItems will be shipped randomly; cosmetic appearance may vary\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"765\" data-end=\"966\"\u003e\u003cstrong data-start=\"765\" data-end=\"804\"\u003eWhy Choose This Handbrake Assembly?\u003c\/strong\u003e\u003cbr data-start=\"804\" data-end=\"807\"\u003eThis handbrake assembly is a reliable, budget-friendly option for GS manual swap enthusiasts who want a complete, working setup without breaking the bank.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51012987093313,"sku":"hlss-schandbrake-1","price":300.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/lexus-sc300sc400-handbrake-assembly-tan-used-2064362.jpg?v=1763589879"},{"product_id":"93-97-gs-handbrake-conversion-bracket","title":"Heat Lightning Speed Shop Handbrake Conversion Bracket Lexus GS 93-97","description":"\u003cp data-start=\"282\" data-end=\"665\"\u003eThe HLSS handbrake conversion bracket allows you to convert the factory foot-operated parking brake in your first-generation Lexus GS300 to a traditional handbrake using an SC300\/SC400 handbrake assembly. Designed as a true bolt-in solution, this kit requires no cutting or welding and includes all necessary brackets and installation instructions for a clean, functional conversion.\u003c\/p\u003e\n\u003cp data-start=\"667\" data-end=\"800\"\u003e\u003cstrong data-start=\"667\" data-end=\"697\"\u003eBolt-In Conversion Design:\u003c\/strong\u003e Converts the factory foot brake to an SC300\/SC400-style handbrake with no cutting or welding required.\u003c\/p\u003e\n\u003cp data-start=\"802\" data-end=\"943\"\u003e\u003cstrong data-start=\"802\" data-end=\"835\"\u003eFactory Tunnel-Based Fitment:\u003c\/strong\u003e Designed around an unmodified factory transmission tunnel to ensure proper alignment and mounting strength.\u003c\/p\u003e\n\u003cp data-start=\"945\" data-end=\"1116\"\u003e\u003cstrong data-start=\"945\" data-end=\"974\"\u003eProven with Manual Swaps:\u003c\/strong\u003e Successfully installed in multiple vehicles equipped with CD00x transmission swaps, provided the factory tunnel stud location remains intact.\u003c\/p\u003e\n\u003cp data-start=\"1118\" data-end=\"1267\"\u003e\u003cstrong data-start=\"1118\" data-end=\"1145\"\u003eClean Interior Upgrade:\u003c\/strong\u003e Relocates braking control to a traditional handbrake position for improved ergonomics and motorsport-style functionality.\u003c\/p\u003e\n\u003cp data-start=\"1269\" data-end=\"1289\"\u003e\u003cstrong data-start=\"1269\" data-end=\"1289\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1292\" data-end=\"1317\"\u003eLexus GS300 (1993–1997)\u003c\/li\u003e\n\u003cli data-start=\"1320\" data-end=\"1357\"\u003eLeft-hand-drive (LHD) vehicles only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1359\" data-end=\"1382\"\u003e\u003cstrong data-start=\"1359\" data-end=\"1382\"\u003eTransmission Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1385\" data-end=\"1424\"\u003eManual transmission applications only\u003c\/li\u003e\n\u003cli data-start=\"1427\" data-end=\"1487\"\u003eAutomatic transmission compatibility has not been verified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1489\" data-end=\"1509\"\u003e\u003cstrong data-start=\"1489\" data-end=\"1509\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1512\" data-end=\"1548\"\u003eHLSS handbrake conversion brackets\u003c\/li\u003e\n\u003cli data-start=\"1551\" data-end=\"1570\"\u003eMounting hardware\u003c\/li\u003e\n\u003cli data-start=\"1573\" data-end=\"1600\"\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1602\" data-end=\"1628\"\u003e\u003cstrong data-start=\"1602\" data-end=\"1628\"\u003eItems You Must Supply:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1631\" data-end=\"1671\"\u003eLexus SC300 \/ SC400 handbrake assembly\u003c\/li\u003e\n\u003cli data-start=\"1674\" data-end=\"1709\"\u003eLeather handbrake boot (optional)\u003c\/li\u003e\n\u003cli data-start=\"1712\" data-end=\"1775\"\u003eFront half of SC handbrake cable (handbrake to extension bar)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1777\" data-end=\"1797\"\u003e\u003cstrong data-start=\"1777\" data-end=\"1797\"\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1800\" data-end=\"1848\"\u003eDesigned for factory transmission tunnels only\u003c\/li\u003e\n\u003cli data-start=\"1851\" data-end=\"1921\"\u003eIf the tunnel has been hammered or reshaped, fitment may be affected\u003c\/li\u003e\n\u003cli data-start=\"1924\" data-end=\"2001\"\u003eOne factory stud on the transmission tunnel is required for proper mounting\u003c\/li\u003e\n\u003cli data-start=\"2004\" data-end=\"2066\"\u003eMinor bracket adjustment may be required on modified tunnels\u003c\/li\u003e\n\u003cli data-start=\"2069\" data-end=\"2139\"\u003ePlease contact HLSS before ordering if your tunnel has been modified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2141\" data-end=\"2569\"\u003e\u003cstrong data-start=\"2141\" data-end=\"2156\"\u003eDisclaimer:\u003c\/strong\u003e\u003cbr data-start=\"2156\" data-end=\"2159\"\u003eThis bracket is intended solely for converting a foot-operated parking brake to a hand-operated parking brake. HLSS does not guarantee the parking brake’s ability to hold the vehicle stationary or lock the rear wheels. This product is for off-road use only. Heat Lightning Speed Shop is not responsible for damages resulting from improper installation or use. Professional installation is strongly recommended.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338824220993,"sku":"hlss-1gshbb","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-handbrake-conversion-bracket-lexus-gs-93-97-3847896.jpg?v=1770232837"},{"product_id":"heat-lightning-speed-shop-jz-swap-mounts-95-00-ls-94-00-celsior","title":"Heat Lightning Speed Shop 1JZ \/ 2JZ Swap Mounts 95-00 LS400 \/ 94-00 Toyota Celsior","description":"\u003cp\u003eBring legendary Toyota JZ power to your Lexus LS with the Heat Lightning Speed Shop (HLSS) JZ Engine Swap Kit! Designed and built in-house by the experts at HLSS, this kit ensures a seamless fit and reliable performance, making it perfect for your next project car or drift build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJZ Engine Compatibility\u003c\/strong\u003e: Adapts any iteration of the Toyota 1JZ \/ 2JZ engine into the Lexus LS chassis, offering incredible versatility for your swap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStreetcar Comfort\u003c\/strong\u003e: Equipped with poly mounts for reduced vibration and a more refined “streetcar” feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Performance\u003c\/strong\u003e: Tested and proven on the HLSS team car over several years and countless drift events, delivering consistent reliability and success.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality You Can Trust\u003c\/strong\u003e: Proudly designed and built in-house by the skilled team at Heat Lightning Speed Shop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLexus LS400 1994-2000\u003c\/li\u003e\n\u003cli\u003eToyota Celsior 1994-2000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor Off Road Use Only\u003c\/strong\u003e – This kit is intended for motorsport or project car applications.\u003c\/p\u003e\n\u003cp\u003eTransform your Lexus LS with the power and performance of a Toyota JZ engine—order your HLSS JZ Engine Swap Kit today!\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338824352065,"sku":"hlss-ucf20emountpoly","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-jz-swap-mounts-95-00-ls-94-00-celsior-764510.png?v=1769920440"},{"product_id":"heat-lightning-speed-shop-cd00x-transmission-cross-member-95-00-ls-94-00-celsior","title":"Heat Lightning Speed Shop CD00x Transmission Cross Member 95-00 LS \/ 94-00 Celsior","description":"\u003cp\u003eEasily mount your CD00x transmission into your Lexus LS400 chassis with this purpose-built cross member. Designed for performance and precision, this cross member ensures a secure fit and hassle-free installation, making it an essential component for your build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Fitment\u003c\/strong\u003e: Specifically engineered to fit the UCF20 Lexus LS400 chassis, offering seamless compatibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Design\u003c\/strong\u003e: Built to withstand the demands of high-performance applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes Rubber Mount\u003c\/strong\u003e: Comes with a rubber mount for added durability and vibration dampening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Off-Road Use Only\u003c\/strong\u003e: Intended for dedicated project cars and motorsport applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLexus LS400 1994-2000\u003c\/li\u003e\n\u003cli\u003eToyota Celsior 1994-2000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your Lexus LS400 or Toyota Celsior with the Heat Lightning Speed Shop CD00x Transmission Cross Member. Designed for precision, durability, and high-performance applications, this cross member ensures a secure transmission fit for your build. Perfect for off-road and motorsport enthusiasts, it’s an essential addition to any serious project car.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338824515905,"sku":"hlss-ucf20cdxmem","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-cd00x-transmission-cross-member-95-00-ls-94-00-celsior-276273.png?v=1769918343"},{"product_id":"95-00-ls-handbrake-conversion-bracket","title":"Heat Lightning Speed Shop Handbrake Conversion Bracket Lexus LS400 95-00","description":"\u003cp\u003eUpgrade your Lexus LS400 with the 95-00 LS Handbrake Conversion Bracket from Heat Lightning Speed Shop. Now you can enjoy the convenience and performance of an SC300\/400 handbrake in your UCF20 LS400 with ease!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eBolt-In Installation:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e No cutting or welding required. Simply unbolt the existing foot brake and cable and use our bracket to bolt in a Lexus SC handbrake.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eComplete Kit:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Includes the bracket, all necessary hardware, and detailed installation instructions for hassle-free setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eLHD Compatibility:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Designed specifically for left-hand drive vehicles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eFactory Transmission Tunnel:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Designed around a factory transmission tunnel for optimal fit and performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eOptional Handbrake Boot:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Compatible with a leather handbrake boot for added style (sold separately).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eAdditional Components Required:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e SC Handbrake, leather handbrake boot (optional), and front half of SC cable (handbrake to cable connector) are needed to complete the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eVehicle Fitment: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eLexus LS400 1995-2000\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHLSS is not responsible for fitment issues if the transmission tunnel has been modified.\u003c\/li\u003e\n\u003cli\u003eModification to the bracket may be required if the transmission tunnel has been hammered for clearance.\u003c\/li\u003e\n\u003cli\u003eThis bracket is intended for converting a foot parking brake to a hand parking brake and may not guarantee the ability to hold the car stationary while stopped or lock up the rear wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your Lexus LS400 with the 95-00 LS Handbrake Conversion Bracket and enjoy the convenience and performance of a handbrake system. Transform your driving experience today!\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338824122689,"sku":"hlss-ucf20hbb","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-handbrake-conversion-bracket-lexus-ls400-95-00-989053.jpg?v=1769917981"},{"product_id":"heat-lightning-speed-shop-clutch-pedal-pad-oem-style","title":"Heat Lightning Speed Shop Clutch Pedal Pad \"OEM\" Style","description":"\u003cp\u003eWe’ve heard your feedback, and we’re excited to introduce the perfect solution to upgrade the look and feel of your clutch pedal conversion! The HLSS Clutch Pedal Pad with \"OEM\" Style Cover is designed to give your Wilwood clutch pedal a clean, factory-style appearance that matches your brake and throttle pedals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM-Inspired Design\u003c\/strong\u003e: The non-slip pad closely resembles the factory brake pedal, offering a cohesive and polished look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Bolt-On Installation\u003c\/strong\u003e: Replace your existing Wilwood clutch pedal pad by unbolting it, bolting on the HLSS pad, and sliding on the \"OEM\" style cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Feel\u003c\/strong\u003e: Provides a more refined, OEM-like feel for improved comfort and confidence while driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Built to withstand daily use, ensuring long-lasting performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose This Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatches the brake and throttle pedals for a consistent aesthetic.\u003c\/li\u003e\n\u003cli\u003eEasy installation process with no complicated modifications.\u003c\/li\u003e\n\u003cli\u003ePerfect for enthusiasts who want a factory-like finish on their clutch pedal conversion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your clutch pedal to achieve the OEM look and feel you've been asking for—order yours today!\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338824286529,"sku":"hlss-cpbpad","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-clutch-pedal-pad-oem-style-125829.png?v=1769919929"},{"product_id":"heat-lightning-speed-shop-cd00x-transmission-crossmember-96-01-jzx100-chaser-mark-ii-cresta","title":"Heat Lightning Speed Shop CD00x Transmission Crossmember JZX100 Chaser\/Mark II\/Cresta 96-01","description":"\u003cp\u003eUpgrade your JZX100’s drivetrain with the Heat Lightning Speed Shop CD00x Transmission Mount Kit, designed in-house to provide a reliable solution for high-power builds. This kit allows you to seamlessly fit a Nissan CD00x transmission into the JZX100 chassis, offering the strength and durability needed to handle increased power levels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for High-Power Builds\u003c\/strong\u003e: The CD00x transmission is a popular swap option known for its ability to handle significant power, making it ideal for high-performance applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineered In-House\u003c\/strong\u003e: Developed and built by Heat Lightning Speed Shop to ensure precise fitment and superior quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCost-Effective Solution\u003c\/strong\u003e: Designed for those looking to upgrade their JZX100 transmission without breaking the bank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeamless Pairing\u003c\/strong\u003e: Works with the Autosports Engineering JZ to CD00x Adapter (sold separately), simplifying your swap process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePolyurethane Mount Included\u003c\/strong\u003e: Comes with a durable polyurethane mount for reduced drivetrain vibrations and increased reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1996-2001 Toyota JZX100 Chaser\u003c\/li\u003e\n\u003cli\u003e1996-2001 Toyota JZX100 Mark II\u003c\/li\u003e\n\u003cli\u003e1996-2001 Toyota JZX100 Cresta\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor Off Road Use Only\u003c\/strong\u003e – This kit is intended for motorsport or project car applications.\u003c\/p\u003e\n\u003cp\u003eThe Heat Lightning Speed Shop CD00x Transmission Crossmember is the ultimate solution for JZX100 owners looking to upgrade to a Nissan CD00x transmission. Designed with performance, durability, and ease of installation in mind, this mount kit ensures your high-power drivetrain operates reliably and smoothly. Pair it with the Autosports Engineering JZ to CD00x Adapter for a straightforward swap. Order your CD00x Transmission Mount Kit today and take your JZX100 build to the next level!\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338825138497,"sku":"hlss-x100cdxmember","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-cd00x-transmission-crossmember-96-01-jzx100-chaser-mark-ii-cresta-983258.png?v=1769916847"},{"product_id":"92-96-jzx90-chaser-mark-ii-cresta-lsx-swap-mounts","title":"Heat Lightning Speed Shop LSx Swap Mount Kit JZX90 Chaser \/ Mark II \/ Cresta 92–96","description":"\u003cp data-start=\"75\" data-end=\"439\"\u003eThe HLSS LSx Swap Mount Kit is designed to allow a GM LS-based engine to be installed into the JZX90 chassis with proper positioning, strength, and adjustability. Designed and built in-house at Heat Lightning Speed Shop, this kit provides a solid foundation for LS-powered drift, track, or project builds while allowing flexibility for different drivetrain setups.\u003c\/p\u003e\n\u003cp data-start=\"441\" data-end=\"617\"\u003e\u003cstrong data-start=\"441\" data-end=\"471\"\u003ePurpose-Built LSx Fitment:\u003c\/strong\u003e Engineered specifically to mount GM LSx engines into the 1992–1996 JZX90 Chaser, Mark II, and Cresta chassis with proper alignment and clearance.\u003c\/p\u003e\n\u003cp data-start=\"619\" data-end=\"812\"\u003e\u003cstrong data-start=\"619\" data-end=\"649\"\u003eSlotted Adjustment Design:\u003c\/strong\u003e Slotted engine mounts allow forward and rearward positioning to fine-tune drivetrain placement based on transmission choice, oil pan clearance, and overall setup.\u003c\/p\u003e\n\u003cp data-start=\"814\" data-end=\"956\"\u003e\u003cstrong data-start=\"814\" data-end=\"839\"\u003eIn-House Development:\u003c\/strong\u003e Designed, fabricated, and tested by Heat Lightning Speed Shop to ensure reliable fitment and real-world performance.\u003c\/p\u003e\n\u003cp data-start=\"958\" data-end=\"1138\"\u003e\u003cstrong data-start=\"958\" data-end=\"997\"\u003ePerformance-Oriented Swap Solution:\u003c\/strong\u003e Ideal for high-performance street builds, drift cars, and motorsport applications requiring a strong and adaptable engine mounting solution.\u003c\/p\u003e\n\u003cp data-start=\"1140\" data-end=\"1160\"\u003e\u003cstrong data-start=\"1140\" data-end=\"1160\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1163\" data-end=\"1196\"\u003eToyota Chaser JZX90 (1992–1996)\u003c\/li\u003e\n\u003cli data-start=\"1199\" data-end=\"1233\"\u003eToyota Mark II JZX90 (1992–1996)\u003c\/li\u003e\n\u003cli data-start=\"1236\" data-end=\"1267\"\u003eToyota Cresta JZX90 (1992–1996)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1269\" data-end=\"1289\"\u003e\u003cstrong data-start=\"1269\" data-end=\"1289\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1290\" data-end=\"1355\"\u003e\n\u003cli data-start=\"1290\" data-end=\"1355\"\u003e\n\u003cp data-start=\"1292\" data-end=\"1355\"\u003eHLSS LSx engine mount kit (engine-side and chassis-side mounts)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1357\" data-end=\"1377\"\u003e\u003cstrong data-start=\"1357\" data-end=\"1377\"\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1380\" data-end=\"1424\"\u003eFront sump oil pan and pickup are required\u003c\/li\u003e\n\u003cli data-start=\"1427\" data-end=\"1504\"\u003eFactory LS starter sits very close to the steering column and steering rack\u003c\/li\u003e\n\u003cli data-start=\"1507\" data-end=\"1571\"\u003eA compact or aftermarket short starter is strongly recommended\u003c\/li\u003e\n\u003cli data-start=\"1574\" data-end=\"1634\"\u003eTransmission, oil pan, and engine accessories not included\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended\u003c\/li\u003e\n\u003cli\u003eFor off-road use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338824581441,"sku":"hlss-lsx90mounts","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-lsx-swap-mount-kit-jzx90-chaser-mark-ii-cresta-92-96-6910664.jpg?v=1770232771"},{"product_id":"96-01-jzx100-chaser-mark-ii-cresta-t56-transmission-crossmember","title":"Heat Lightning Speed Shop T56 Transmission Crossmember Toyota Chaser \/ Mark II \/ Cresta JZX100 96–01","description":"\u003cp data-start=\"280\" data-end=\"599\"\u003eThe HLSS T56 transmission crossmember is designed to allow installation of a Tremec T56 transmission into the JZX100 Chaser, Mark II, and Cresta chassis. Designed and built in-house at Heat Lightning Speed Shop, this crossmember provides proper transmission positioning while maintaining factory-like shifter placement.\u003c\/p\u003e\n\u003cp data-start=\"601\" data-end=\"744\"\u003e\u003cstrong data-start=\"601\" data-end=\"632\"\u003eIn-House Engineered Design:\u003c\/strong\u003e Designed and fabricated by Heat Lightning Speed Shop to ensure precise fitment and reliable drivetrain support.\u003c\/p\u003e\n\u003cp data-start=\"746\" data-end=\"883\"\u003e\u003cstrong data-start=\"746\" data-end=\"781\"\u003eT56 Transmission Compatibility:\u003c\/strong\u003e Engineered specifically around an F-Body Tremec T56 transmission for optimal alignment and clearance.\u003c\/p\u003e\n\u003cp data-start=\"885\" data-end=\"1013\"\u003e\u003cstrong data-start=\"885\" data-end=\"914\"\u003eFactory Shifter Location:\u003c\/strong\u003e Positions the shifter in the stock JZX100 location for a clean interior fit and proper ergonomics.\u003c\/p\u003e\n\u003cp data-start=\"1015\" data-end=\"1181\"\u003e\u003cstrong data-start=\"1015\" data-end=\"1060\"\u003ePolyurethane Transmission Mount Included:\u003c\/strong\u003e Supplied with a durable polyurethane mount to reduce drivetrain movement while maintaining reasonable vibration control.\u003c\/p\u003e\n\u003cp data-start=\"1183\" data-end=\"1203\"\u003e\u003cstrong data-start=\"1183\" data-end=\"1203\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1206\" data-end=\"1240\"\u003eToyota Chaser JZX100 (1996–2001)\u003c\/li\u003e\n\u003cli data-start=\"1243\" data-end=\"1278\"\u003eToyota Mark II JZX100 (1996–2001)\u003c\/li\u003e\n\u003cli data-start=\"1281\" data-end=\"1315\"\u003eToyota Cresta JZX100 (1996–2001)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1317\" data-end=\"1337\"\u003e\u003cstrong data-start=\"1317\" data-end=\"1337\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1340\" data-end=\"1375\"\u003eHLSS T56 transmission crossmember\u003c\/li\u003e\n\u003cli data-start=\"1378\" data-end=\"1411\"\u003ePolyurethane transmission mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1413\" data-end=\"1433\"\u003e\u003cstrong data-start=\"1413\" data-end=\"1433\"\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1436\" data-end=\"1478\"\u003eDesigned around F-Body T56 transmissions\u003c\/li\u003e\n\u003cli data-start=\"1481\" data-end=\"1526\"\u003eIntended for manual transmission swaps only\u003c\/li\u003e\n\u003cli data-start=\"1529\" data-end=\"1568\"\u003eProfessional installation recommended\u003c\/li\u003e\n\u003cli\u003eFor off-road use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338825662785,"sku":"hlss-x100t56xmem","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-t56-transmission-crossmember-toyota-chaser-mark-ii-cresta-jzx100-96-01-6491498.jpg?v=1770232761"},{"product_id":"heat-lightning-speed-shop-clutch-pedal-kit-reservoir-mount-96-01-jzx100-chaser-mark-ii-cresta","title":"Heat Lightning Speed Shop Clutch Pedal Reservoir Mount 96-01 JZX100 Chaser\/Mark II\/Cresta","description":"\u003cp\u003eSimplify your clutch system upgrade with this Reservoir Mount, designed specifically for use with the Wilwood clutch pedal reservoir included in our JZX100 Clutch Pedal Kit. This mount provides a clean, secure, and functional solution to keep your reservoir neatly tucked behind the driver’s side shock tower.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Installation\u003c\/strong\u003e: Places the reservoir discreetly behind the driver’s side shock tower for a tidy and unobtrusive setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with Wilwood\u003c\/strong\u003e: Designed to work with the Wilwood clutch pedal reservoir (not included).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Performance\u003c\/strong\u003e: Durable construction to withstand the demands of motorsport and high-performance applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Off Road Use Only\u003c\/strong\u003e – This mount is intended for motorsport or project car applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1996-2001 Toyota JZX100 Chaser\u003c\/li\u003e\n\u003cli\u003e1996-2001 Toyota JZX100 Mark II\u003c\/li\u003e\n\u003cli\u003e1996-2001 Toyota JZX100 Cresta\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wilwood reservoir not included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003cstrong data-end=\"2045\" data-start=\"2031\"\u003e\u003cstrong data-start=\"0\" data-end=\"14\" data-is-only-node=\"\"\u003e \u003c\/strong\u003e\u003cbr data-start=\"14\" data-end=\"17\"\u003e\u003c\/strong\u003eProfessional installation is recommended. Not all components in this kit are manufactured by HLSS; this kit includes Wilwood parts. Wilwood components are not covered under any warranty by HLSS or Lunaticsco. HLSS and Lunaticsco assume no responsibility for improper installation or misuse. This kit is intended for off-road use only.\u003c\/p\u003e\n\u003cp\u003eUpgrade your JZX100 clutch system with the Heat Lightning Speed Shop Clutch Pedal Kit Reservoir Mount. Its thoughtful design ensures a clean, secure installation, making it the perfect addition to your high-performance or motorsport build. Pair it with a Wilwood clutch pedal reservoir to complete your setup. Order yours today and take the next step in perfecting your JZX100 project!\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338825400641,"sku":"hlss-x100cpb-resmount","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-clutch-pedal-kit-reservoir-mount-96-01-jzx100-chaser-mark-ii-cresta-472898.png?v=1769920228"},{"product_id":"91-97-1st-gen-aristo-handbrake-conversion-bracket","title":"Heat Lightning Speed Shop Handbrake Conversion Bracket Aristo 91-97","description":"\u003cp data-start=\"206\" data-end=\"510\"\u003eConvert the factory foot-operated parking brake to a traditional handbrake setup with the HLSS Bolt-In Handbrake Conversion Bracket for the 1st generation Toyota Aristo. This kit allows you to install a Lexus SC300 \/ SC400 handbrake using a bracket-based solution that requires no cutting or welding.\u003c\/p\u003e\n\u003cp data-start=\"512\" data-end=\"649\"\u003e\u003cstrong data-start=\"512\" data-end=\"540\"\u003eSC Handbrake Conversion:\u003c\/strong\u003e Designed to replace the factory foot parking brake and allow fitment of an SC300 \/ SC400 handbrake assembly.\u003c\/p\u003e\n\u003cp data-start=\"651\" data-end=\"881\"\u003e\u003cstrong data-start=\"651\" data-end=\"682\"\u003eBolt-In Style Installation:\u003c\/strong\u003e Requires drilling three holes in the transmission tunnel, but no cutting or welding is needed. Factory foot brake and cable are removed, and the SC handbrake is bolted in using the HLSS bracket.\u003c\/p\u003e\n\u003cp data-start=\"883\" data-end=\"971\"\u003e\u003cstrong data-start=\"883\" data-end=\"907\"\u003eRHD-Specific Design:\u003c\/strong\u003e Engineered specifically for right-hand-drive vehicles only.\u003c\/p\u003e\n\u003cp data-start=\"973\" data-end=\"1141\"\u003e\u003cstrong data-start=\"973\" data-end=\"1001\"\u003eFactory Tunnel Required:\u003c\/strong\u003e Designed around an unmodified factory transmission tunnel. Fitment issues may occur if the tunnel has been hammered, reshaped, or modified.\u003c\/p\u003e\n\u003cp data-start=\"1254\" data-end=\"1273\"\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1275\" data-end=\"1344\"\u003eToyota Aristo 1991-1997, Right-Hand Drive (RHD) models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1346\" data-end=\"1371\"\u003e\u003cstrong\u003eParts You Must Supply:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1373\" data-end=\"1513\"\u003eLexus SC300 \/ SC400 handbrake assembly\u003c\/li\u003e\n\u003cli data-start=\"1373\" data-end=\"1513\"\u003eLeather handbrake boot (optional)\u003c\/li\u003e\n\u003cli data-start=\"1373\" data-end=\"1513\"\u003eFront half of SC handbrake cable (handbrake to extension bar)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1515\" data-end=\"1534\"\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1536\" data-end=\"1615\"\u003eHLSS 1st Gen Aristo handbrake conversion bracket\u003c\/li\u003e\n\u003cli data-start=\"1536\" data-end=\"1615\"\u003eRequired mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1617\" data-end=\"1636\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1638\" data-end=\"1765\"\u003eRequires drilling 3 holes in the transmission tunnel\u003c\/li\u003e\n\u003cli data-start=\"1638\" data-end=\"1765\"\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli data-start=\"1638\" data-end=\"1765\"\u003eProfessional installation recommended\u003c\/li\u003e\n\u003cli data-start=\"1638\" data-end=\"1765\"\u003eThis kit has \u003cstrong data-start=\"1193\" data-end=\"1251\"\u003enot been verified to work with automatic transmissions\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1767\" data-end=\"1781\"\u003e\u003cstrong\u003eDisclaimer: \u003c\/strong\u003eThis bracket is intended solely to convert a foot-operated parking brake to a hand-operated parking brake. HLSS does not guarantee the ability of this modification to hold the vehicle stationary or lock the rear wheels. This product is intended for off-road use only. Heat Lightning Speed Shop is not responsible for damages resulting from improper installation or misuse. \u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338825793857,"sku":"hlss-1aristohbb","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-handbrake-conversion-bracket-aristo-91-97-1085381.png?v=1769990484"},{"product_id":"95-00-ls400-clutch-pedal-kit","title":"Heat Lightning Speed Shop Clutch Pedal Kit Lexus LS400 95-00","description":"\u003cp\u003eUpgrade your Lexus LS400 to the next level of performance and control with the Heat Lightning Speed Shop Clutch Pedal Kit. Designed to deliver seamless installation and enhanced driving dynamics, this kit ensures a smooth transition to manual transmission for a thrilling driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWilwood Clutch Pedal:\u003c\/strong\u003e Enjoy precision control and responsive pedal feel with the included Wilwood clutch pedal, designed for optimal performance and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWilwood Master Cylinder:\u003c\/strong\u003e The kit comes complete with a Wilwood master cylinder featuring a remote mount reservoir, providing reliable hydraulic performance and smooth clutch engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClutch Line:\u003c\/strong\u003e A high-quality clutch line is included in the kit, ensuring seamless fluid transfer and consistent clutch operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHLSS Custom Bracket:\u003c\/strong\u003e Benefit from the HLSS custom bracket and all necessary hardware for easy and secure installation, enhancing the overall reliability and functionality of your clutch system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e Detailed instructions are provided to guide you through the installation process, making it simple and straightforward.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoval of factory foot pedal parking brake required.\u003c\/li\u003e\n\u003cli\u003eThe factory brake pedal must be modified to accommodate the clutch pedal.\u003c\/li\u003e\n\u003cli\u003eTemporary relocation of wiring harnesses, fuse box, and ECM may be necessary.\u003c\/li\u003e\n\u003cli\u003eClutch line fitting for -4AN to your slave cylinder not included (must be supplied separately).\u003c\/li\u003e\n\u003cli\u003eHLSS offers a separate handbrake for UCF20 models to replace the factory parking brake.\u003c\/li\u003e\n\u003cli\u003eWilwood parts are utilized in this kit and are not covered under any warranty by HLSS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLexus LS400 1995-2000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003cstrong data-start=\"2031\" data-end=\"2045\"\u003e\u003cstrong data-is-only-node=\"\" data-end=\"14\" data-start=\"0\"\u003e \u003c\/strong\u003e\u003cbr data-end=\"17\" data-start=\"14\"\u003e\u003c\/strong\u003eProfessional installation is recommended. Not all components in this kit are manufactured by HLSS; this kit includes Wilwood parts. Wilwood components are not covered under any warranty by HLSS or Lunaticsco. HLSS and Lunaticsco assume no responsibility for improper installation or misuse. This kit is intended for off-road use only.\u003c\/p\u003e\n\u003cp\u003eElevate your driving experience with the HLSS Clutch Pedal Kit for your Lexus LS400. Whether you're hitting the track or enhancing your daily commute, this kit delivers the performance and reliability you demand.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"95-98 \/ 5\/8\" \/ include pedal pad and pedal stop","offer_id":51338826121537,"sku":"sku-44413841375388","price":530.0,"currency_code":"USD","in_stock":true},{"title":"95-98 \/ 5\/8\" \/ pedal pad only","offer_id":51338826154305,"sku":"sku-44413841408156","price":475.0,"currency_code":"USD","in_stock":true},{"title":"95-98 \/ 5\/8\" \/ pedal stop only","offer_id":51403716264257,"sku":"sku-46256539467932","price":495.0,"currency_code":"USD","in_stock":true},{"title":"95-98 \/ 5\/8\" \/ no add on","offer_id":51403716297025,"sku":"sku-46256539500700","price":440.0,"currency_code":"USD","in_stock":true},{"title":"95-98 \/ 3\/4\" \/ include pedal pad and pedal stop","offer_id":51338826252609,"sku":"sku-44413841473692","price":530.0,"currency_code":"USD","in_stock":true},{"title":"95-98 \/ 3\/4\" \/ pedal pad only","offer_id":51338826285377,"sku":"sku-44413841506460","price":475.0,"currency_code":"USD","in_stock":true},{"title":"95-98 \/ 3\/4\" \/ pedal stop only","offer_id":51403716460865,"sku":"sku-46256539664540","price":495.0,"currency_code":"USD","in_stock":true},{"title":"95-98 \/ 3\/4\" \/ no add on","offer_id":51403716493633,"sku":"sku-46256539697308","price":440.0,"currency_code":"USD","in_stock":true},{"title":"99-00 \/ 5\/8\" \/ include pedal pad and pedal stop","offer_id":51403716329793,"sku":"sku-46256539533468","price":530.0,"currency_code":"USD","in_stock":true},{"title":"99-00 \/ 5\/8\" \/ pedal pad only","offer_id":51403716362561,"sku":"sku-46256539566236","price":475.0,"currency_code":"USD","in_stock":true},{"title":"99-00 \/ 5\/8\" \/ pedal stop only","offer_id":51403716395329,"sku":"sku-46256539599004","price":495.0,"currency_code":"USD","in_stock":true},{"title":"99-00 \/ 5\/8\" \/ no add on","offer_id":51403716428097,"sku":"sku-46256539631772","price":440.0,"currency_code":"USD","in_stock":true},{"title":"99-00 \/ 3\/4\" \/ include pedal pad and pedal stop","offer_id":51403716526401,"sku":"sku-46256539730076","price":530.0,"currency_code":"USD","in_stock":true},{"title":"99-00 \/ 3\/4\" \/ pedal pad only","offer_id":51403716559169,"sku":"sku-46256539762844","price":475.0,"currency_code":"USD","in_stock":true},{"title":"99-00 \/ 3\/4\" \/ pedal stop only","offer_id":51403716591937,"sku":"sku-46256539795612","price":495.0,"currency_code":"USD","in_stock":true},{"title":"99-00 \/ 3\/4\" \/ no add on","offer_id":51403716624705,"sku":"sku-46256539828380","price":440.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-clutch-pedal-kit-lexus-ls400-95-00-4390118.png?v=1769990485"},{"product_id":"97-05-aristo-handbrake-conversion-bracket","title":"Heat Lightning Speed Shop Handbrake Conversion Bracket Aristo 97-05","description":"\u003cp data-start=\"233\" data-end=\"519\"\u003eConvert your factory foot-operated parking brake to a proper handbrake with the HLSS 2nd Gen Aristo Bolt-In Handbrake Conversion Kit. This kit allows you to install an SC300 \/ SC400 handbrake into your 2nd generation Aristo using a bolt-in bracket system—no cutting or welding required.\u003c\/p\u003e\n\u003cp data-start=\"521\" data-end=\"703\"\u003e\u003cstrong data-start=\"521\" data-end=\"549\"\u003eTrue Bolt-In Conversion:\u003c\/strong\u003e Designed to replace the factory foot parking brake by utilizing OEM mounting locations with HLSS-engineered brackets for a clean and secure installation.\u003c\/p\u003e\n\u003cp data-start=\"705\" data-end=\"888\"\u003e\u003cstrong data-start=\"705\" data-end=\"734\"\u003eSC Handbrake Integration:\u003c\/strong\u003e Uses a factory SC300 \/ SC400 handbrake assembly, positioning it on the left-hand side of the transmission tunnel for a proper manual-transmission layout.\u003c\/p\u003e\n\u003cp data-start=\"890\" data-end=\"1033\"\u003e\u003cstrong data-start=\"890\" data-end=\"919\"\u003eManual Transmission Only:\u003c\/strong\u003e This conversion is intended exclusively for manual-transmission vehicles and will not work with automatic setups.\u003c\/p\u003e\n\u003cp data-start=\"1035\" data-end=\"1158\"\u003e\u003cstrong data-start=\"1035\" data-end=\"1059\"\u003eRHD-Specific Design:\u003c\/strong\u003e Engineered specifically for right-hand-drive vehicles. This kit is not compatible with LHD models.\u003c\/p\u003e\n\u003cp data-start=\"1160\" data-end=\"1325\"\u003e\u003cstrong data-start=\"1160\" data-end=\"1188\"\u003eFactory Tunnel Required:\u003c\/strong\u003e Designed around an unmodified factory transmission tunnel. Installation should be completed before any tunnel reshaping or modification.\u003c\/p\u003e\n\u003cp data-start=\"1327\" data-end=\"1346\"\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1348\" data-end=\"1444\"\u003eToyota Aristo 1997-2005 (Right-Hand Drive (RHD) model and manual transmission only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1446\" data-end=\"1473\"\u003e\u003cstrong\u003eImportant Fitment Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1475\" data-end=\"1784\"\u003eWorks only with manual transmissions\u003c\/li\u003e\n\u003cli data-start=\"1475\" data-end=\"1784\"\u003ePlaces SC handbrake on the LH side of the transmission tunnel\u003c\/li\u003e\n\u003cli data-start=\"1475\" data-end=\"1784\"\u003eTransmission tunnel must remain factory-shaped\u003c\/li\u003e\n\u003cli data-start=\"1475\" data-end=\"1784\"\u003eHLSS is not responsible for fitment issues caused by modified or reshaped tunnels\u003c\/li\u003e\n\u003cli data-start=\"1475\" data-end=\"1784\"\u003eHandbrake installation is recommended prior to any tunnel modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1786\" data-end=\"1811\"\u003e\u003cstrong\u003eParts You Must Supply\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1813\" data-end=\"1949\"\u003eSC300 \/ SC400 handbrake assembly\u003c\/li\u003e\n\u003cli data-start=\"1813\" data-end=\"1949\"\u003eLeather handbrake boot (optional)\u003c\/li\u003e\n\u003cli data-start=\"1813\" data-end=\"1949\"\u003eFront half of SC handbrake cable (handbrake to cable connector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1951\" data-end=\"1970\"\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1972\" data-end=\"2136\"\u003e2GS V2 SC handbrake conversion bracket\u003c\/li\u003e\n\u003cli data-start=\"1972\" data-end=\"2136\"\u003e2Aristo to 2GS adapter bracket\u003c\/li\u003e\n\u003cli data-start=\"1972\" data-end=\"2136\"\u003e2Aristo to SC 2-to-1 cable connector\u003c\/li\u003e\n\u003cli data-start=\"1972\" data-end=\"2136\"\u003eComplete hardware kit\u003c\/li\u003e\n\u003cli data-start=\"1972\" data-end=\"2136\"\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2138\" data-end=\"2152\"\u003e\u003cstrong\u003eDisclaimer: \u003c\/strong\u003eThis kit is intended solely to convert a foot-operated parking brake to a hand-operated parking brake. HLSS does not guarantee the holding power of the parking brake or its ability to lock the rear wheels. This product is for off-road use only. Heat Lightning Speed Shop is not responsible for damages resulting from improper installation or use. Professional installation is strongly recommended.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338826383681,"sku":"HLSS-2AristoHBB","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-handbrake-conversion-bracket-aristo-97-05-4659741.png?v=1769990479"},{"product_id":"96-01-x100-chaser-mark-ii-cresta-clutch-pedal-kit","title":"Heat Lightning Speed Shop Clutch Pedal Kit Toyota JXZ100\/Chaser 96-01","description":"\u003cdiv class=\"flex-1 overflow-hidden\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-sxbqo-79elbk h-full\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-sxbqo-1n7m0yu\"\u003e\n\u003cdiv class=\"flex flex-col pb-9 text-sm\"\u003e\n\u003cdiv data-testid=\"conversation-turn-89\" class=\"w-full text-token-text-primary\"\u003e\n\u003cdiv class=\"px-4 py-2 justify-center text-base md:gap-6 m-auto\"\u003e\n\u003cdiv class=\"flex flex-1 text-base mx-auto gap-3 md:px-5 lg:px-1 xl:px-5 md:max-w-3xl lg:max-w-[40rem] xl:max-w-[48rem] group final-completion\"\u003e\n\u003cdiv class=\"relative flex w-full flex-col agent-turn\"\u003e\n\u003cdiv class=\"flex-col gap-1 md:gap-3\"\u003e\n\u003cdiv class=\"flex flex-grow flex-col max-w-full\"\u003e\n\u003cdiv class=\"min-h-[20px] text-message flex flex-col items-start gap-3 whitespace-pre-wrap break-words [.text-message+\u0026amp;]:mt-5 overflow-x-auto\" data-message-id=\"b3c96029-9efd-43c2-95dc-88139e618854\" data-message-author-role=\"assistant\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cp\u003eUpgrade your Toyota Chaser to the next level of performance and control with the Heat Lightning Speed Shop Clutch Pedal Kit. Designed to deliver seamless installation and enhanced driving dynamics, this kit ensures a smooth transition to manual transmission for a thrilling driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWilwood Clutch Pedal:\u003c\/strong\u003e Enjoy precision control and responsive pedal feel with the included Wilwood clutch pedal, designed for optimal performance and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWilwood Master Cylinder:\u003c\/strong\u003e The kit comes complete with a Wilwood master cylinder featuring a remote mount reservoir, providing reliable hydraulic performance and smooth clutch engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClutch Line:\u003c\/strong\u003e A high-quality clutch line is included in the kit, ensuring seamless fluid transfer and consistent clutch operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHLSS Custom Bracket:\u003c\/strong\u003e Benefit from the HLSS custom bracket and all necessary hardware for easy and secure installation, enhancing the overall reliability and functionality of your clutch system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e Detailed instructions are provided to guide you through the installation process, making it simple and straightforward.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe factory foot pedal parking brake must be removed to accommodate the installation of this kit.\u003c\/li\u003e\n\u003cli\u003eYou will need to supply your own clutch line fitting for -4AN to your slave cylinder.\u003c\/li\u003e\n\u003cli\u003eThe reservoir mount is sold separately.\u003c\/li\u003e\n\u003cli\u003eChoose between a 5\/8 bore master cylinder or a 3\/4 bore master cylinder based on your preference.\u003c\/li\u003e\n\u003cli\u003eThis kit is built to order, with a lead time of 1-2 weeks before pickup or shipment.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReservoir mount sold separately.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003cstrong data-end=\"2045\" data-start=\"2031\"\u003e\u003cstrong data-start=\"0\" data-end=\"14\" data-is-only-node=\"\"\u003e \u003c\/strong\u003e\u003cbr data-start=\"14\" data-end=\"17\"\u003e\u003c\/strong\u003eProfessional installation is recommended. Not all components in this kit are manufactured by HLSS; this kit includes Wilwood parts. Wilwood components are not covered under any warranty by HLSS or Lunaticsco. HLSS and Lunaticsco assume no responsibility for improper installation or misuse. This kit is intended for off-road use only.\u003c\/p\u003e\n\u003cp\u003eUpgrade your clutch system with confidence using the Heat Lightning Clutch Pedal Kit, offering superior performance and reliability for your Toyota Chaser.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"5\/8\" \/ No \/ No","offer_id":51338828120385,"sku":"hlss-x100cpb5\/8","price":440.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ No \/ Yes","offer_id":51338828153153,"sku":"sku-44413843210396","price":475.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes \/ No","offer_id":51338828185921,"sku":"sku-44413843243164","price":495.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes \/ Yes","offer_id":51338828218689,"sku":"sku-44413843275932","price":530.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ No","offer_id":51338828251457,"sku":"hlss-x100cpb3\/4","price":440.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ Yes","offer_id":51338828284225,"sku":"sku-44413843308700","price":475.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes \/ No","offer_id":51338828316993,"sku":"sku-44413843341468","price":495.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes \/ Yes","offer_id":51338828349761,"sku":"sku-44413843374236","price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-clutch-pedal-kit-toyota-jxz100chaser-96-01-169077.jpg?v=1769715415"},{"product_id":"heat-lightning-speed-shop-reservoir-mount-lexus-gs-93-97-clutch-pedal-kit","title":"Heat Lightning Speed Shop Reservoir Mount For Clutch Pedal Kit Lexus GS 93-97","description":"\u003cp\u003eUpgrade your clutch system with this Reservoir Mount, specifically designed to work with the Wilwood clutch pedal reservoir included in our 1GS Clutch Pedal Kit. This mount provides a clean, functional solution for securing the reservoir, keeping it neatly tucked behind the driver’s side shock tower.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustom Fit\u003c\/strong\u003e: Designed exclusively for the 1993-1997 Lexus GS (1GS chassis) clutch pedal kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClean Installation\u003c\/strong\u003e: Mounts the reservoir securely behind the driver’s side shock tower for a sleek and unobtrusive setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete with Hardware\u003c\/strong\u003e: Includes all necessary hardware for a hassle-free installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFree Shipping\u003c\/strong\u003e: Enjoy free shipping on this product!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Off Road Use Only\u003c\/strong\u003e – This product is designed for motorsport or project car applications and is not intended for street use.\u003c\/p\u003e\n\u003cp\u003eStreamline your clutch system upgrade with this 1GS Reservoir Mount—order yours today!\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338825990465,"sku":"hlss-1gscpb-resmount","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-reservoir-mount-lexus-gs-93-97-clutch-pedal-kit-247700.png?v=1769710729"},{"product_id":"heat-lightning-clutch-pedal-kit-lexus-93-97-gs","title":"Heat Lightning Speed Shop Clutch Pedal Kit Lexus GS300 93-97","description":"\u003cp\u003eUpgrade your Lexus LS400 to the next level of performance and control with the Heat Lightning Speed Shop Clutch Pedal Kit. Designed to deliver seamless installation and enhanced driving dynamics, this kit ensures a smooth transition to manual transmission for a thrilling driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWilwood Clutch Pedal:\u003c\/strong\u003e Enjoy precision control and responsive pedal feel with the included Wilwood clutch pedal, designed for optimal performance and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWilwood Master Cylinder:\u003c\/strong\u003e The kit comes complete with a Wilwood master cylinder featuring a remote mount reservoir, providing reliable hydraulic performance and smooth clutch engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClutch Line:\u003c\/strong\u003e A high-quality clutch line is included in the kit, ensuring seamless fluid transfer and consistent clutch operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHLSS Custom Bracket:\u003c\/strong\u003e Benefit from the HLSS custom bracket and all necessary hardware for easy and secure installation, enhancing the overall reliability and functionality of your clutch system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e Detailed instructions are provided to guide you through the installation process, making it simple and straightforward.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRemoval of factory foot pedal parking brake required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThe factory brake pedal must be modified to accommodate the clutch pedal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTemporary relocation of wiring harnesses, fuse box, and ECM may be necessary.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClutch line fitting for -4AN to your slave cylinder not included (must be supplied separately).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHLSS offers a separate handbrake for UCF20 models to replace the factory parking brake.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWilwood parts are utilized in this kit and are not covered under any warranty by HLSS.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003cstrong data-start=\"2031\" data-end=\"2045\"\u003e\u003cstrong data-is-only-node=\"\" data-end=\"14\" data-start=\"0\"\u003e \u003c\/strong\u003e\u003cbr data-end=\"17\" data-start=\"14\"\u003e\u003c\/strong\u003eProfessional installation is recommended. Not all components in this kit are manufactured by HLSS; this kit includes Wilwood parts. Wilwood components are not covered under any warranty by HLSS or Lunaticsco. HLSS and Lunaticsco assume no responsibility for improper installation or misuse. This kit is intended for off-road use only.\u003c\/p\u003e\n\u003cp\u003eElevate your driving experience with the HLSS Clutch Pedal Kit for your Lexus LS400. Whether you're hitting the track or enhancing your daily commute, this kit delivers the performance and reliability you demand.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"5\/8\" \/ No \/ No","offer_id":51338827530561,"sku":"hlss-1gscpb5\/8","price":440.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ No \/ Yes include pedal pad","offer_id":51338827563329,"sku":"sku-44413834330268","price":475.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes include pedal stop \/ No","offer_id":51338827596097,"sku":"sku-44413834363036","price":495.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes include pedal stop \/ Yes include pedal pad","offer_id":51338827628865,"sku":"sku-44413834395804","price":530.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ No","offer_id":51338827661633,"sku":"hlss-1gscpb3\/4","price":440.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ Yes include pedal pad","offer_id":51338827694401,"sku":"sku-44413834428572","price":475.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes include pedal stop \/ No","offer_id":51338827727169,"sku":"sku-44413834461340","price":495.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes include pedal stop \/ Yes include pedal pad","offer_id":51338827759937,"sku":"sku-44413834494108","price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-clutch-pedal-kit-lexus-gs300-93-97-5724286.png?v=1769730852"},{"product_id":"gs-heat-lightning-speed-shop-clutch-pedal-kit","title":"Heat Lightning Speed Shop Clutch Pedal Kit Lexus 98-05 GS300\/400\/430","description":"\u003cp data-start=\"194\" data-end=\"477\"\u003eTransform your driving experience with the Heat Lightning Speed Shop Clutch Pedal Kit, engineered specifically for the 2GS Lexus platform. This complete solution provides a clean, bolt-in installation for manual conversions without the need for cutting or drilling into the firewall.\u003c\/p\u003e\n\u003cp data-start=\"479\" data-end=\"621\"\u003e\u003cstrong data-start=\"479\" data-end=\"509\"\u003eComplete Bolt-In Solution:\u003c\/strong\u003e Designed for seamless installation using a custom HLSS bracket, eliminating the need for firewall modification.\u003c\/p\u003e\n\u003cp data-start=\"623\" data-end=\"739\"\u003e\u003cstrong data-start=\"623\" data-end=\"657\"\u003eWilwood Clutch Pedal Assembly:\u003c\/strong\u003e Precision-engineered for smooth operation, durability, and consistent pedal feel.\u003c\/p\u003e\n\u003cp data-start=\"741\" data-end=\"867\"\u003e\u003cstrong data-start=\"741\" data-end=\"769\"\u003eWilwood Master Cylinder:\u003c\/strong\u003e Includes a high-performance master cylinder with remote reservoir for reliable clutch engagement.\u003c\/p\u003e\n\u003cp data-start=\"869\" data-end=\"984\"\u003e\u003cstrong data-start=\"869\" data-end=\"896\"\u003eIntegrated Clutch Line:\u003c\/strong\u003e Comes with a clutch line to simplify installation and reduce additional parts sourcing.\u003c\/p\u003e\n\u003cp data-start=\"986\" data-end=\"1101\"\u003e\u003cstrong data-start=\"986\" data-end=\"1019\"\u003eCustom HLSS Mounting Bracket:\u003c\/strong\u003e Specifically designed for the 2GS chassis to ensure proper fitment and alignment.\u003c\/p\u003e\n\u003cp data-start=\"1103\" data-end=\"1207\"\u003e\u003cstrong data-start=\"1103\" data-end=\"1134\"\u003eFull Hardware Kit Included:\u003c\/strong\u003e All necessary mounting hardware is provided for a complete installation.\u003c\/p\u003e\n\u003cp data-start=\"1209\" data-end=\"1318\"\u003e\u003cstrong data-start=\"1209\" data-end=\"1246\"\u003eSelectable Master Cylinder Sizes:\u003c\/strong\u003e Available in 5\/8\" or 3\/4\" bore options to suit different clutch setups.\u003c\/p\u003e\n\u003cp data-start=\"1320\" data-end=\"1417\"\u003e\u003cstrong data-start=\"1320\" data-end=\"1359\"\u003eInstallation Instructions Included:\u003c\/strong\u003e Step-by-step instructions help guide proper installation.\u003c\/p\u003e\n\u003cp data-start=\"1419\" data-end=\"1544\"\u003e\u003cstrong data-start=\"1419\" data-end=\"1451\"\u003eOptional Handbrake Solution:\u003c\/strong\u003e Compatible with HLSS hand brake brackets for builds removing the factory foot parking brake.\u003c\/p\u003e\n\u003cp data-start=\"1546\" data-end=\"1565\"\u003e\u003cstrong data-start=\"1546\" data-end=\"1565\"\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1567\" data-end=\"1698\"\u003e\n\u003cli data-section-id=\"10comg4\" data-start=\"1567\" data-end=\"1610\"\u003eLexus GS300 Base (1998–2005) \u003cem data-start=\"1598\" data-end=\"1608\"\u003e(JZS160)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1aycpzt\" data-start=\"1611\" data-end=\"1654\"\u003eLexus GS400 Base (1998–2000) \u003cem data-start=\"1642\" data-end=\"1652\"\u003e(UZS160)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"6knzp0\" data-start=\"1655\" data-end=\"1698\"\u003eLexus GS430 Base (2001–2005) \u003cem data-start=\"1686\" data-end=\"1696\"\u003e(UZS161)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1700\" data-end=\"1719\"\u003e\u003cstrong data-start=\"1700\" data-end=\"1719\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1721\" data-end=\"2029\"\u003e\n\u003cli data-section-id=\"exp0k1\" data-start=\"1721\" data-end=\"1769\"\u003eNot compatible with RHD Toyota Aristo models\u003c\/li\u003e\n\u003cli data-section-id=\"15qdd9t\" data-start=\"1770\" data-end=\"1829\"\u003eRemoval of factory foot pedal parking brake is required\u003c\/li\u003e\n\u003cli data-section-id=\"rs9ea5\" data-start=\"1830\" data-end=\"1884\"\u003eABS ECU relocation is required during installation\u003c\/li\u003e\n\u003cli data-section-id=\"1x36o4a\" data-start=\"1885\" data-end=\"1958\"\u003eRequires -4AN fitting for connection to slave cylinder (not included)\u003c\/li\u003e\n\u003cli data-section-id=\"10z7v5r\" data-start=\"1959\" data-end=\"2029\"\u003eSelect correct master cylinder size before purchase (no exchanges)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2290\" data-end=\"2330\"\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003cstrong data-start=\"2031\" data-end=\"2045\"\u003e\u003cstrong data-is-only-node=\"\" data-end=\"14\" data-start=\"0\"\u003e \u003c\/strong\u003e\u003cbr data-end=\"17\" data-start=\"14\"\u003e\u003c\/strong\u003eProfessional installation is recommended. Not all components in this kit are manufactured by HLSS; this kit includes Wilwood parts. Wilwood components are not covered under any warranty by HLSS or Lunaticsco. HLSS and Lunaticsco assume no responsibility for improper installation or misuse. This kit is intended for off-road use only.\u003c\/p\u003e\n\u003cp data-start=\"2332\" data-end=\"2562\"\u003eHeat Lightning Speed Shop specializes in high-quality swap components designed for clean installs and reliable performance. Their clutch pedal kits simplify manual conversions while maintaining proper ergonomics and functionality.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"5\/8\" \/ No \/ No","offer_id":51338829529409,"sku":"sku-44413730783388","price":440.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ No \/ Yes include pedal pad","offer_id":51338829562177,"sku":"sku-44413730750620","price":475.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes include pedal stop \/ No","offer_id":51338829594945,"sku":"sku-44413730717852","price":495.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes include pedal stop \/ Yes include pedal pad","offer_id":51338829627713,"sku":"hlss-2gscpb5\/8","price":530.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ No","offer_id":51338829660481,"sku":"sku-44413730881692","price":440.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ Yes include pedal pad","offer_id":51338829693249,"sku":"sku-44413730848924","price":475.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes include pedal stop \/ No","offer_id":51338829726017,"sku":"sku-44413730816156","price":495.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes include pedal stop \/ Yes include pedal pad","offer_id":51338829758785,"sku":"hlss-2gscpb3\/4","price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-clutch-pedal-kit-lexus-98-05-gs300gs400gs430-187430.jpg?v=1769702900"},{"product_id":"91-97-aristo-clutch-pedal-kit","title":"Heat Lightning Speed Shop Clutch Pedal Kit Toyota 91-97 Aristo RHD","description":"\u003cp data-end=\"671\" data-start=\"235\"\u003eThe HLSS 1st Gen Aristo Clutch Pedal Kit is finally here. This highly anticipated kit is a fully bolt-on solution designed specifically for the JZS147 Toyota Aristo, allowing you to convert to a clutch pedal without cutting or drilling the firewall. Engineered for clean fitment and reliable operation, this kit provides everything needed to add a hydraulic clutch pedal using proven Wilwood components and HLSS custom hardware.\u003c\/p\u003e\n\u003cp data-end=\"835\" data-start=\"673\"\u003e\u003cstrong data-end=\"697\" data-start=\"673\"\u003eTrue Bolt-On Design:\u003c\/strong\u003e No cutting or drilling of the firewall required, making this one of the cleanest clutch pedal solutions available for the 1st gen Aristo.\u003c\/p\u003e\n\u003cp data-end=\"1000\" data-start=\"837\"\u003e\u003cstrong data-end=\"865\" data-start=\"837\"\u003eComplete Pedal Solution:\u003c\/strong\u003e Includes Wilwood clutch pedal, master cylinder, remote reservoir, and HLSS custom mounting bracket for proper geometry and pedal feel.\u003c\/p\u003e\n\u003cp data-end=\"1129\" data-start=\"1002\"\u003e\u003cstrong data-end=\"1035\" data-start=\"1002\"\u003eWilwood Hydraulic Components:\u003c\/strong\u003e Utilizes high-quality Wilwood parts for consistent pedal feel and reliable clutch engagement.\u003c\/p\u003e\n\u003cp data-end=\"1252\" data-start=\"1131\"\u003e\u003cstrong data-end=\"1158\" data-start=\"1131\"\u003eRemote Reservoir Setup:\u003c\/strong\u003e Includes a remote mount clutch reservoir for flexible placement and clean engine bay routing.\u003c\/p\u003e\n\u003cp data-end=\"1337\" data-start=\"1254\"\u003e\u003cstrong data-end=\"1280\" data-start=\"1254\"\u003eAdjustable Pedal Stop:\u003c\/strong\u003e Allows fine tuning of pedal travel and engagement point.\u003c\/p\u003e\n\u003cp data-end=\"1424\" data-start=\"1339\"\u003e\u003cstrong data-end=\"1363\" data-start=\"1339\"\u003eOEM-Style Pedal Pad:\u003c\/strong\u003e Maintains a factory-inspired look and feel inside the cabin.\u003c\/p\u003e\n\u003cp data-end=\"1544\" data-start=\"1426\"\u003e\u003cstrong data-end=\"1452\" data-start=\"1426\"\u003eHLSS Custom Bracketry:\u003c\/strong\u003e Precision-designed bracket and hardware ensure secure mounting and correct pedal alignment.\u003c\/p\u003e\n\u003cp data-end=\"1681\" data-start=\"1546\"\u003e\u003cstrong data-end=\"1578\" data-start=\"1546\"\u003eTwo Master Cylinder Options:\u003c\/strong\u003e Available with either a 5\/8” or 3\/4” bore master cylinder. Selection must be made at time of purchase.\u003c\/p\u003e\n\u003cp data-end=\"1699\" data-start=\"1683\"\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1887\" data-start=\"1701\"\u003eWilwood clutch pedal\u003c\/li\u003e\n\u003cli data-end=\"1887\" data-start=\"1701\"\u003eWilwood master cylinder with remote mount reservoir\u003c\/li\u003e\n\u003cli data-end=\"1887\" data-start=\"1701\"\u003eClutch line\u003c\/li\u003e\n\u003cli data-end=\"1887\" data-start=\"1701\"\u003eHLSS custom mounting bracket\u003c\/li\u003e\n\u003cli data-end=\"1887\" data-start=\"1701\"\u003eAll required installation hardware\u003c\/li\u003e\n\u003cli data-end=\"1887\" data-start=\"1701\"\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1908\" data-start=\"1889\"\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1949\" data-start=\"1910\"\u003eToyota Aristo (1st Generation – JZS147)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1970\" data-start=\"1951\"\u003e\u003cstrong\u003eImportant Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"1970\" data-start=\"1951\"\u003eFactory foot-operated parking brake must be removed. Customer must supply their own -4AN clutch line fitting to match their slave cylinder This kit is offered with a 5\/8” or 3\/4” bore master cylinder — no exchanges, please select carefully\u003c\/p\u003e\n\u003cp data-end=\"2389\" data-start=\"2222\"\u003eA handbrake solution is available for the 1st gen Aristo to replace the factory parking brake removed during installation. Be sure to check that option out separately.\u003c\/p\u003e\n\u003cp data-end=\"2405\" data-start=\"2391\"\u003e\u003cstrong data-is-only-node=\"\" data-end=\"14\" data-start=\"0\"\u003eDisclaimer: \u003c\/strong\u003e\u003cbr data-end=\"17\" data-start=\"14\"\u003eProfessional installation is recommended. Not all components in this kit are manufactured by HLSS; this kit includes Wilwood parts. Wilwood components are not covered under any warranty by HLSS or Lunaticsco. HLSS and Lunaticsco assume no responsibility for improper installation or misuse. This kit is intended for off-road use only.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"5\/8\" \/ No \/ No","offer_id":51338828644673,"sku":"hlss-1aristocpb5\/8","price":440.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ No \/ Yes include pedal pad","offer_id":51338828677441,"sku":"sku-44413839048860","price":475.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes include pedal stop \/ No","offer_id":51338828710209,"sku":"sku-44413839081628","price":495.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes include pedal stop \/ Yes include pedal pad","offer_id":51338828742977,"sku":"sku-44413839114396","price":530.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ No","offer_id":51338828775745,"sku":"hlss-1aristocpb3\/4","price":440.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ Yes include pedal pad","offer_id":51338828808513,"sku":"sku-44413839147164","price":475.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes include pedal stop \/ No","offer_id":51338828841281,"sku":"sku-44413839179932","price":495.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes include pedal stop \/ Yes include pedal pad","offer_id":51338828874049,"sku":"sku-44413839212700","price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-clutch-pedal-kit-91-97-aristo-2822734.png?v=1769990477"},{"product_id":"97-05-aristo-clutch-pedal-kit-reservoir-mount","title":"Heat Lightning Speed Shop Clutch Pedal Kit Reservoir Mount Aristo 97-05","description":"\u003cp data-start=\"204\" data-end=\"526\"\u003eThis clutch pedal reservoir mount is designed specifically to work with the \u003cstrong data-start=\"280\" data-end=\"315\"\u003eWilwood clutch master reservoir\u003c\/strong\u003e included in our \u003cstrong data-start=\"332\" data-end=\"366\"\u003eToyota Aristo clutch pedal kit\u003c\/strong\u003e. It relocates the reservoir neatly behind the driver-side shock tower, keeping it securely mounted and tucked out of the way for a clean, organized engine bay.\u003c\/p\u003e\n\u003cp data-start=\"528\" data-end=\"656\"\u003e\u003cstrong data-start=\"528\" data-end=\"553\"\u003ePurpose-Built Design:\u003c\/strong\u003e Engineered to pair perfectly with the Wilwood reservoir supplied in our 97–05 Aristo clutch pedal kit.\u003c\/p\u003e\n\u003cp data-start=\"658\" data-end=\"831\"\u003e\u003cstrong data-start=\"658\" data-end=\"689\"\u003eClean Reservoir Relocation:\u003c\/strong\u003e Positions the reservoir behind the driver-side shock tower to reduce engine bay clutter and protect the reservoir from heat and interference.\u003c\/p\u003e\n\u003cp data-start=\"833\" data-end=\"953\"\u003e\u003cstrong data-start=\"833\" data-end=\"860\"\u003eDirect Bolt-On Fitment:\u003c\/strong\u003e Designed for straightforward installation using factory mounting locations where applicable.\u003c\/p\u003e\n\u003cp data-start=\"955\" data-end=\"1078\"\u003e\u003cstrong data-start=\"955\" data-end=\"980\"\u003eDurable Construction:\u003c\/strong\u003e Built to securely support the clutch fluid reservoir under performance and motorsport conditions.\u003c\/p\u003e\n\u003cp data-start=\"1080\" data-end=\"1172\"\u003e\u003cstrong data-start=\"1080\" data-end=\"1102\"\u003eHardware Included:\u003c\/strong\u003e Comes complete with all necessary mounting hardware for installation.\u003c\/p\u003e\n\u003cp data-start=\"1174\" data-end=\"1231\"\u003e\u003cstrong data-start=\"1174\" data-end=\"1192\"\u003eFree Shipping:\u003c\/strong\u003e Ships free within the continental U.S.\u003c\/p\u003e\n\u003cp data-start=\"1233\" data-end=\"1252\"\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1254\" data-end=\"1279\"\u003eToyota Aristo (1997–2005)\u003c\/p\u003e\n\u003cp data-start=\"1281\" data-end=\"1301\"\u003e\u003cstrong\u003eAdditional Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1303\" data-end=\"1479\"\u003eDesigned for use with Wilwood clutch reservoir included in our Aristo clutch pedal kit\u003cbr data-start=\"1389\" data-end=\"1392\"\u003eClutch reservoir not included with this mount\u003cbr data-start=\"1437\" data-end=\"1440\"\u003eProfessional installation recommended\u003c\/p\u003e\n\u003cp data-start=\"1481\" data-end=\"1495\"\u003e\u003cstrong\u003eDisclaimer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1497\" data-end=\"1596\"\u003eThis product is intended for off-road use only. Proper installation is critical for safe operation.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338828972353,"sku":"hlss-2Aristocpb-resmount","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-clutch-pedal-kit-reservoir-mount-aristo-97-05-5649494.png?v=1769990476"},{"product_id":"98-05-gs-clutch-pedal-kit-reservoir-mount","title":"Heat Lightning Speed Shop Clutch Pedal Kit Reservoir Mount 98-05 GS","description":"\u003cp data-start=\"195\" data-end=\"531\"\u003eThis clutch pedal reservoir mount is designed specifically to work with the \u003cstrong data-start=\"271\" data-end=\"306\"\u003eWilwood clutch master reservoir\u003c\/strong\u003e included in our \u003cstrong data-start=\"323\" data-end=\"360\"\u003e2nd Gen Lexus GS clutch pedal kit\u003c\/strong\u003e. It relocates the reservoir cleanly behind the driver-side shock tower, keeping it securely mounted and tucked out of the way for a clean, professional engine bay layout.\u003c\/p\u003e\n\u003cp data-start=\"533\" data-end=\"657\"\u003e\u003cstrong data-start=\"533\" data-end=\"558\"\u003ePurpose-Built Design:\u003c\/strong\u003e Engineered to pair perfectly with the Wilwood reservoir supplied in our 98–05 GS clutch pedal kit.\u003c\/p\u003e\n\u003cp data-start=\"659\" data-end=\"804\"\u003e\u003cstrong data-start=\"659\" data-end=\"690\"\u003eClean Reservoir Relocation:\u003c\/strong\u003e Positions the reservoir behind the driver-side shock tower to reduce clutter and improve engine bay organization.\u003c\/p\u003e\n\u003cp data-start=\"806\" data-end=\"908\"\u003e\u003cstrong data-start=\"806\" data-end=\"833\"\u003eDirect Bolt-On Fitment:\u003c\/strong\u003e Designed for straightforward installation with included mounting hardware.\u003c\/p\u003e\n\u003cp data-start=\"910\" data-end=\"1026\"\u003e\u003cstrong data-start=\"910\" data-end=\"935\"\u003eDurable Construction:\u003c\/strong\u003e Built to securely support the clutch fluid reservoir under performance driving conditions.\u003c\/p\u003e\n\u003cp data-start=\"1028\" data-end=\"1120\"\u003e\u003cstrong data-start=\"1028\" data-end=\"1050\"\u003eHardware Included:\u003c\/strong\u003e Comes complete with all necessary mounting hardware for installation.\u003c\/p\u003e\n\u003cp data-start=\"1122\" data-end=\"1179\"\u003e\u003cstrong data-start=\"1122\" data-end=\"1140\"\u003eFree Shipping:\u003c\/strong\u003e Ships free within the continental U.S.\u003c\/p\u003e\n\u003cp data-start=\"1181\" data-end=\"1200\"\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1202\" data-end=\"1241\"\u003eLexus GS300 \/ GS400 \/ GS430 (1998–2005)\u003c\/p\u003e\n\u003cp data-start=\"1243\" data-end=\"1263\"\u003e\u003cstrong\u003eAdditional Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1265\" data-end=\"1437\"\u003eDesigned for use with Wilwood clutch reservoir included in our GS clutch pedal kit\u003cbr data-start=\"1347\" data-end=\"1350\"\u003eClutch reservoir not included with this mount\u003cbr data-start=\"1395\" data-end=\"1398\"\u003eProfessional installation recommended\u003c\/p\u003e\n\u003cp data-start=\"1439\" data-end=\"1453\"\u003e\u003cstrong\u003eDisclaimer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1455\" data-end=\"1554\"\u003eThis product is intended for off-road use only. Proper installation is critical for safe operation.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"Default Title","offer_id":51338829365569,"sku":"hlss-2gscpb-resmount","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-clutch-pedal-kit-reservoir-mount-98-05-gs-6471647.png?v=1769990476"},{"product_id":"heat-lightning-speed-shop-clutch-pedal-kit-aristo-97-05-rhd","title":"Heat Lightning Speed Shop Clutch Pedal Kit 97-05 Toyota Aristo RHD","description":"\u003cp data-start=\"208\" data-end=\"509\"\u003eElevate your driving experience with the Heat Lightning Speed Shop Clutch Pedal Kit, designed to provide a complete bolt-in solution for manual conversions on the 2GS chassis. This kit eliminates the need for cutting or drilling into the firewall, making installation cleaner and more straightforward.\u003c\/p\u003e\n\u003cp data-start=\"511\" data-end=\"653\"\u003e\u003cstrong data-start=\"511\" data-end=\"541\"\u003eComplete Bolt-In Solution:\u003c\/strong\u003e Designed for seamless installation using a custom HLSS bracket, eliminating the need for firewall modification.\u003c\/p\u003e\n\u003cp data-start=\"655\" data-end=\"769\"\u003e\u003cstrong data-start=\"655\" data-end=\"682\"\u003eWilwood Pedal Assembly:\u003c\/strong\u003e Includes a precision-engineered Wilwood clutch pedal for smooth, responsive operation.\u003c\/p\u003e\n\u003cp data-start=\"771\" data-end=\"896\"\u003e\u003cstrong data-start=\"771\" data-end=\"799\"\u003eWilwood Master Cylinder:\u003c\/strong\u003e Comes with a high-quality master cylinder and remote reservoir for consistent clutch engagement.\u003c\/p\u003e\n\u003cp data-start=\"898\" data-end=\"999\"\u003e\u003cstrong data-start=\"898\" data-end=\"922\"\u003eCustom HLSS Bracket:\u003c\/strong\u003e Engineered specifically for proper fitment and alignment within the chassis.\u003c\/p\u003e\n\u003cp data-start=\"1001\" data-end=\"1111\"\u003e\u003cstrong data-start=\"1001\" data-end=\"1026\"\u003eIncluded Clutch Line:\u003c\/strong\u003e Provides a more complete installation setup, reducing the need for additional parts.\u003c\/p\u003e\n\u003cp data-start=\"1113\" data-end=\"1202\"\u003e\u003cstrong data-start=\"1113\" data-end=\"1144\"\u003eComprehensive Hardware Kit:\u003c\/strong\u003e Includes all required mounting hardware for installation.\u003c\/p\u003e\n\u003cp data-start=\"1204\" data-end=\"1319\"\u003e\u003cstrong data-start=\"1204\" data-end=\"1241\"\u003eFlexible Master Cylinder Options:\u003c\/strong\u003e Available in 5\/8\" or 3\/4\" bore sizes to match your clutch setup requirements.\u003c\/p\u003e\n\u003cp data-start=\"1321\" data-end=\"1423\"\u003e\u003cstrong data-start=\"1321\" data-end=\"1360\"\u003eInstallation Instructions Included:\u003c\/strong\u003e Detailed guidance provided to assist with proper installation.\u003c\/p\u003e\n\u003cp data-start=\"1425\" data-end=\"1559\"\u003e\u003cstrong data-start=\"1425\" data-end=\"1461\"\u003eAdditional Compatibility Option:\u003c\/strong\u003e Can be paired with HLSS hand brake brackets for builds removing the factory parking brake system.\u003c\/p\u003e\n\u003cp data-start=\"1561\" data-end=\"1580\"\u003e\u003cstrong data-start=\"1561\" data-end=\"1580\"\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1582\" data-end=\"1713\"\u003e\n\u003cli data-section-id=\"10comg4\" data-start=\"1582\" data-end=\"1625\"\u003eLexus GS300 Base (1998–2005) \u003cem data-start=\"1613\" data-end=\"1623\"\u003e(JZS160)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1aycpzt\" data-start=\"1626\" data-end=\"1669\"\u003eLexus GS400 Base (1998–2000) \u003cem data-start=\"1657\" data-end=\"1667\"\u003e(UZS160)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"6knzp0\" data-start=\"1670\" data-end=\"1713\"\u003eLexus GS430 Base (2001–2005) \u003cem data-start=\"1701\" data-end=\"1711\"\u003e(UZS161)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1715\" data-end=\"1734\"\u003e\u003cstrong data-start=\"1715\" data-end=\"1734\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1736\" data-end=\"2069\"\u003e\n\u003cli data-section-id=\"sq6upn\" data-start=\"1736\" data-end=\"1812\"\u003eDesigned for LHD vehicles only \u003cem data-start=\"1769\" data-end=\"1810\"\u003e(Not compatible with RHD Toyota Aristo)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"15qdd9t\" data-start=\"1813\" data-end=\"1872\"\u003eRemoval of factory foot pedal parking brake is required\u003c\/li\u003e\n\u003cli data-section-id=\"rs9ea5\" data-start=\"1873\" data-end=\"1927\"\u003eABS ECU relocation is required during installation\u003c\/li\u003e\n\u003cli data-section-id=\"x8m81o\" data-start=\"1928\" data-end=\"1998\"\u003eRequires -4AN clutch line fitting to slave cylinder (not included)\u003c\/li\u003e\n\u003cli data-section-id=\"10z7v5r\" data-start=\"1999\" data-end=\"2069\"\u003eSelect correct master cylinder size before purchase (no exchanges)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2071\" data-end=\"2085\"\u003e\u003cstrong data-is-only-node=\"\" data-end=\"14\" data-start=\"0\"\u003eDisclaimer: \u003c\/strong\u003e\u003cbr data-end=\"17\" data-start=\"14\"\u003eProfessional installation is recommended. Not all components in this kit are manufactured by HLSS; this kit includes Wilwood parts. Wilwood components are not covered under any warranty by HLSS or Lunaticsco. HLSS and Lunaticsco assume no responsibility for improper installation or misuse. This kit is intended for off-road use only.\u003c\/p\u003e\n\u003cp data-start=\"2372\" data-end=\"2606\"\u003eHeat Lightning Speed Shop specializes in high-quality swap components designed for clean installation and reliable performance. Their clutch pedal kits simplify manual conversions while maintaining proper ergonomics and functionality.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"5\/8\" \/ No \/ No","offer_id":51338829824321,"sku":"hlss-2aristocpb5\/8","price":440.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ No \/ Yes include pedal pad","offer_id":51338829857089,"sku":"sku-44413790355612","price":475.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes include pedal stop \/ No","offer_id":51338829889857,"sku":"sku-44413790617756","price":495.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\" \/ Yes include pedal stop \/ Yes include pedal pad","offer_id":51338829922625,"sku":"sku-44413790650524","price":530.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ No","offer_id":51338829955393,"sku":"hlss-2aristocpb3\/4","price":440.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ No \/ Yes include pedal pad","offer_id":51338829988161,"sku":"sku-44413790683292","price":475.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes include pedal stop \/ No","offer_id":51338830020929,"sku":"sku-44413790716060","price":495.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\" \/ Yes include pedal stop \/ Yes include pedal pad","offer_id":51338830053697,"sku":"sku-44413790748828","price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-clutch-pedal-kit-97-05-aristo-rhd-377961.jpg?v=1769698038"},{"product_id":"gs-heat-lightning-speed-shop-handbrake-conversion-bracket","title":"Heat Lightning Speed Shop Handbrake Conversion Bracket Lexus 98-05 GS300\/400","description":"\u003cp\u003eAre you ready to upgrade your 2GS vehicle with a bolt-in handbrake solution? Look no further! Our kit allows for a hassle-free handbrake conversion by utilizing an SC300\/SC400 handbrake. Say goodbye to the existing foot brake and cable and say hello to a seamless installation of an SC handbrake.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Compatibility: \u003c\/strong\u003eOur conversion bracket is designed to work with both auto and manual transmissions. However, please note that this kit is exclusively designed for left-hand drive (LHD) vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBracket Variants: \u003c\/strong\u003eThere are two distinct variants of this bracket to cater to different vehicle setups. It's essential to specify your requirement when ordering. Both bracket variants position the handbrake within the cabin in the same location, with the primary difference being the method of chassis mounting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eV2 Variant\u003c\/strong\u003e: Ideal for cars that have undergone a manual swap and will not accommodate the factory automatic shifter. This version typically suits vehicles with modified transmission tunnels, like those fitted with a CD00X, W58 with an appropriate shifter housing, or R154 with an appropriate shifter housing. The V2 bracket makes use of the M6 threaded hole situated directly in front of the factory shifter hole. Ensure compatibility with your transmission swap before making any tunnel alterations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eV1 Variant\u003c\/strong\u003e: Tailored for vehicles that have experienced either automatic or manual swaps but have retained the original, unaltered shape of the transmission tunnel. We recommend this bracket for automatic cars that possess a factory-shaped transmission tunnel and intend to remain automatic. This variant is also more suitable for those planning to extend the factory shifter hole forward, potentially affecting the M6 threaded holes surrounding it.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManual Transmission Swaps: \u003c\/strong\u003eIf you plan to perform a manual transmission swap and can accommodate the V2 bracket, we recommend selecting the V2 handbrake bracket. Please note that you will only be able to install the handbrake bracket after completing your manual swap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTransmission Tunnel Modifications: \u003c\/strong\u003eIt's essential to know that the V1 kit was created based on the factory transmission tunnel shape. If your transmission tunnel has been modified or hammered in any way, we cannot be held responsible for fitment issues. We strongly advise contacting us with any questions before purchasing to ensure a seamless fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Components Required: \u003c\/strong\u003eYou will need to supply the following components separately:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSC Handbrake\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLeather handbrake boot (optional)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFront half of SC cable (handbrake to cable connector)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSC 2-1 cable connector (IS300 cable connector works as well)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDISCLAIMER:\u003c\/strong\u003e This bracket is for the purpose of converting the foot parking brake to a hand parking brake. The manufacturer does not guarantee the ability of this parking brake modification to hold the car stationary while stopped or to lock up the rear wheels. This kit is for off-road use only. Professional installation is recommended, and the manufacturer is not liable for any damages that may result from improper installation and\/or the use of this item.\u003c\/p\u003e","brand":"Heat Lightning Speed Shop","offers":[{"title":"V2","offer_id":51338831528257,"sku":"HLSS-2GSHBBV2","price":200.0,"currency_code":"USD","in_stock":true},{"title":"V1","offer_id":51338831561025,"sku":"HLSS-2GSHBBV1","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/heat-lightning-speed-shop-handbrake-conversion-bracket-lexus-98-05-gs300-400-7599785.png?v=1769730912"},{"product_id":"xcessove-manufacturing-sc300-sc400-transmission-cross-member-manual-trans","title":"Xcessive Manufacturing Transmission Cross Member (Lexus SC300\/400) - Manual","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cp\u003eWhether you're swapping to a 5-speed or upgrading from a W58 to an R154 transmission, Xcessive Manufacturing's transmission cross member is the ideal solution. Here's why it's the perfect choice for your project:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eRobust Construction:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Formed from a single plate of 1\/4\" steel, Xcessive Manufacturing's cross member ensures durability and strength. The absence of welds adds to its robustness.\u003c\/span\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eSlim Profile:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Keeping it simple doesn't just mean a straightforward design – it also translates to an attractive price point. Xcessive Manufacturing's cross member provides a cost-effective solution without compromising quality.\u003c\/span\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eDouble Slotted Design:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e The innovative double slotted design makes this cross member versatile, accommodating both W58 and R154 transmissions. Enjoy flexibility in your transmission choice without the need for additional modifications.\u003c\/span\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eCompatibility with Stock Rubber Mounts:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Designed to work seamlessly with stock rubber transmission mounts, Xcessive Manufacturing's cross member offers a hassle-free installation. If you prefer a urethane mount, we have options available for specific transmission types.\u003c\/span\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eUrethane Mount Options:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e For those opting for a urethane mount and using a late-model W58 or R154 transmission from an SC or similar year, the T-UTM-S2 is the perfect match. Additionally, the T-UTM-S5 is available for early W58 or R154 transmissions, converting them to the later wide bolt pattern.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for 5-speed swaps or transitioning from a W58 to an R154 transmission.\u003c\/li\u003e\n\u003cli\u003eCompatible with stock rubber transmission mounts.\u003c\/li\u003e\n\u003cli\u003eUrethane mount options available for specific transmission types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your transmission setup with confidence using Xcessive Manufacturing's transmission cross member. Enjoy a sturdy construction, versatile design, and compatibility with various transmission and mount options. Simplify your project and elevate your driving experience.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":51362064073025,"sku":"T-ZZ3-TCM","price":112.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/xcessive-manufacturings-lexus-sc300sc400-transmission-cross-member-manual-transmission-678455.jpg?v=1770335013"},{"product_id":"xcessive-manufacturing-ar5-flat-mount-to-toyota-early","title":"Xcessive Manufacturing AR5 to Toyota Urethane Transmission Mount – Early","description":"\u003cp data-end=\"972\" data-start=\"438\"\u003eThe AR5 to Toyota Urethane Mount is designed to adapt the GM AR5 (MA5) transmission to the Toyota R154 mounting location when paired with a JZ–R154 bellhousing. Because the AR5 sits ½ inch taller from the output shaft centerline to the mount base compared to the R154, a ½-inch crossmember spacer may be required to properly align driveline geometry. This mount features the early MK3 Supra–style four-stud bolt pattern and is engineered specifically for flat-bottom AR5 units—not the V-style mount found on some variants.\u003c\/p\u003e\n\u003cp data-end=\"1156\" data-start=\"974\"\u003e\u003cstrong data-end=\"1026\" data-start=\"974\"\u003eDesigned for AR5 (MA5) to R154 Mounting Location: \u003c\/strong\u003eBuilt specifically to adapt the AR5 transmission to the factory Toyota R154 mounting position when using a JZ–R154 bellhousing.\u003c\/p\u003e\n\u003cp data-end=\"1351\" data-start=\"1158\"\u003e\u003cstrong data-end=\"1188\" data-start=\"1158\"\u003eCorrects Height Difference: \u003c\/strong\u003eThe AR5 sits 0.5\" higher than the R154 at the mount; in some setups, a ½\" spacer may be needed to lower the crossmember and restore proper driveline centerline.\u003c\/p\u003e\n\u003cp data-end=\"1564\" data-start=\"1353\"\u003e\u003cstrong data-end=\"1385\" data-start=\"1353\"\u003eEarly MK3 Supra Bolt Pattern: \u003c\/strong\u003eUses the smaller four-stud bolt pattern found on early MK3 Supra mounts. (\u003cem data-end=\"1564\" data-start=\"1463\"\u003eIf you need the IS300-style larger bolt pattern, choose our AR5 to Toyota – Late Mount instead.)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-end=\"1732\" data-start=\"1566\"\u003e\u003cstrong data-end=\"1600\" data-start=\"1566\"\u003eFor Flat-Bottom AR5 Units Only: \u003c\/strong\u003eCompatible only with AR5\/MA5 transmissions that use the flat two-bolt lower mount. Not compatible with the V-style AR5 mount.\u003c\/p\u003e\n\u003cp data-end=\"1862\" data-start=\"1734\"\u003e\u003cstrong data-end=\"1767\" data-start=\"1734\"\u003eDurable Urethane Construction: \u003c\/strong\u003eProvides improved strength, longevity, and drivetrain control compared to OEM rubber mounts.\u003c\/p\u003e\n\u003cp data-end=\"1883\" data-start=\"1864\"\u003e\u003cstrong data-end=\"1881\" data-start=\"1864\"\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"2136\" data-start=\"1884\"\u003e\n\u003cli data-end=\"1942\" data-start=\"1884\"\u003e\n\u003cp data-end=\"1942\" data-start=\"1886\"\u003eAR5 \/ MA5 transmission with flat-bottom two-bolt mount\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1973\" data-start=\"1943\"\u003e\n\u003cp data-end=\"1973\" data-start=\"1945\"\u003eJZ–R154 bellhousing setups\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2023\" data-start=\"1974\"\u003e\n\u003cp data-end=\"2023\" data-start=\"1976\"\u003eEarly MK3 Supra four-stud crossmember pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2066\" data-start=\"2024\"\u003e\n\u003cp data-end=\"2066\" data-start=\"2026\"\u003eNot compatible with V-style AR5 mounts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2136\" data-start=\"2067\"\u003e\n\u003cp data-end=\"2136\" data-start=\"2069\"\u003eFor later IS300-style large pattern, use the \u003cem data-end=\"2126\" data-start=\"2114\"\u003eLate Mount\u003c\/em\u003e version\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2459\" data-start=\"2138\"\u003e\u003cstrong data-end=\"2177\" data-start=\"2138\"\u003eWhy Choose Our AR5 to Toyota Mount?\u003c\/strong\u003e\u003cbr data-end=\"2180\" data-start=\"2177\"\u003eThis mount is engineered for builders performing AR5 swaps into JZ platforms who need proper driveline alignment and OEM-style fitment. With reinforced urethane construction and precise geometry, it ensures reliability and alignment where generic or improvised mounts fall short.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Orange 80A Bushings (Normal)","offer_id":51362064335169,"sku":"AR5-UTM-A-S3","price":141.5,"currency_code":"USD","in_stock":true},{"title":"Yellow 65A Bushings (Softer)","offer_id":51362064367937,"sku":"AR5-UTM-A-S3-Y","price":141.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/xcessive-manufacturing-ar5-flat-mount-to-toyota-early-4882891.png?v=1770343066"},{"product_id":"xcessive-manufacturing-jzs160-clutch-pedal-98-05-gs300","title":"Xcessive Manufacturing JZS160 Clutch Pedal (98-05 GS300)","description":"\u003cp data-start=\"263\" data-end=\"614\"\u003eIf you’re performing a \u003cstrong data-start=\"286\" data-end=\"329\"\u003e5-speed manual swap on a JZS160 chassis\u003c\/strong\u003e, this clutch pedal assembly is a required component. Since the USDM GS300 was never offered with a manual transmission, there is no factory clutch pedal provision—making this the \u003cstrong data-start=\"509\" data-end=\"557\"\u003eonly readily available clutch pedal solution\u003c\/strong\u003e that is even close to a bolt-in for the JZS160 platform.\u003c\/p\u003e\n\u003cp data-start=\"616\" data-end=\"730\"\u003e\u003cstrong data-start=\"616\" data-end=\"652\"\u003eManual Swap Essential Component:\u003c\/strong\u003e Required for converting a JZS160 GS300 from automatic to manual transmission.\u003c\/p\u003e\n\u003cp data-start=\"732\" data-end=\"900\"\u003e\u003cstrong data-start=\"732\" data-end=\"769\"\u003eClosest Bolt-In Design Available:\u003c\/strong\u003e Designed specifically to fit the JZS160 chassis geometry, minimizing fabrication compared to adapting pedals from other platforms.\u003c\/p\u003e\n\u003cp data-start=\"902\" data-end=\"1076\"\u003e\u003cstrong data-start=\"902\" data-end=\"937\"\u003eFirewall Modification Required:\u003c\/strong\u003e Installation requires drilling \u003cstrong data-start=\"969\" data-end=\"1000\"\u003ethree holes in the firewall\u003c\/strong\u003e and relocating some under-dash wiring to properly mount the pedal assembly.\u003c\/p\u003e\n\u003cp data-start=\"1078\" data-end=\"1114\"\u003e\u003cstrong data-start=\"1078\" data-end=\"1112\"\u003eHeavy-Duty Steel Construction:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1115\" data-end=\"1294\"\u003e\n\u003cli data-start=\"1115\" data-end=\"1167\"\u003e\n\u003cp data-start=\"1117\" data-end=\"1167\"\u003eMain mounting bracket formed from \u003cstrong data-start=\"1151\" data-end=\"1165\"\u003e1\/8\" steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1168\" data-end=\"1221\"\u003e\n\u003cp data-start=\"1170\" data-end=\"1221\"\u003eHanging pedal arm constructed from \u003cstrong data-start=\"1205\" data-end=\"1219\"\u003e1\/4\" steel\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1222\" data-end=\"1294\"\u003e\n\u003cp data-start=\"1224\" data-end=\"1294\"\u003eUses a \u003cstrong data-start=\"1231\" data-end=\"1245\"\u003e12mm pivot\u003c\/strong\u003e for strength, durability, and smooth operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1296\" data-end=\"1457\"\u003e\u003cstrong data-start=\"1296\" data-end=\"1336\"\u003eComplete Mounting Hardware Included:\u003c\/strong\u003e All required bolts and hardware for mounting the clutch pedal and connecting to the clutch master cylinder are included.\u003c\/p\u003e\n\u003cp data-start=\"1459\" data-end=\"1618\"\u003e\u003cstrong data-start=\"1459\" data-end=\"1485\"\u003eMaster Cylinder Ready:\u003c\/strong\u003e Pedal assembly is designed to interface with a clutch master cylinder, but \u003cstrong data-start=\"1561\" data-end=\"1600\"\u003ethe master cylinder is not included\u003c\/strong\u003e in the basic kit.\u003c\/p\u003e\n\u003cp data-start=\"1620\" data-end=\"1707\"\u003e\u003cstrong data-start=\"1620\" data-end=\"1644\"\u003eLHD-Specific Design:\u003c\/strong\u003e Designed specifically for \u003cstrong data-start=\"1671\" data-end=\"1697\"\u003eleft-hand-drive (USDM)\u003c\/strong\u003e vehicles.\u003c\/p\u003e\n\u003cp data-start=\"1709\" data-end=\"1834\"\u003e\u003cstrong data-start=\"1709\" data-end=\"1735\"\u003eExpandable Kit Option:\u003c\/strong\u003e Clutch master cylinder can be added to your order if you’d like a complete setup shipped together.\u003c\/p\u003e\n\u003cp data-start=\"1836\" data-end=\"1994\"\u003e\u003cstrong data-start=\"1836\" data-end=\"1881\"\u003eCompatible With Aftermarket Clutch Lines:\u003c\/strong\u003e Works with common aftermarket clutch line solutions—be sure to check out compatible clutch lines for your build.\u003c\/p\u003e\n\u003cp data-start=\"1996\" data-end=\"2018\"\u003e\u003cstrong data-start=\"1996\" data-end=\"2016\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"2019\" data-end=\"2127\"\u003e\n\u003cli data-start=\"2019\" data-end=\"2044\"\u003e\n\u003cp data-start=\"2021\" data-end=\"2044\"\u003eClutch pedal assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2045\" data-end=\"2070\"\u003e\n\u003cp data-start=\"2047\" data-end=\"2070\"\u003eMain mounting bracket\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2071\" data-end=\"2092\"\u003e\n\u003cp data-start=\"2073\" data-end=\"2092\"\u003eHanging pedal arm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2093\" data-end=\"2127\"\u003e\n\u003cp data-start=\"2095\" data-end=\"2127\"\u003eAll required mounting hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2129\" data-end=\"2148\"\u003e\u003cstrong data-start=\"2129\" data-end=\"2146\"\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"2149\" data-end=\"2201\"\u003e\n\u003cli data-start=\"2149\" data-end=\"2175\"\u003e\n\u003cp data-start=\"2151\" data-end=\"2175\"\u003eClutch master cylinder\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2176\" data-end=\"2201\"\u003e\n\u003cp data-start=\"2178\" data-end=\"2201\"\u003eClutch hydraulic line\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2203\" data-end=\"2225\"\u003e\u003cstrong data-start=\"2203\" data-end=\"2223\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"2226\" data-end=\"2290\"\u003e\n\u003cli data-start=\"2226\" data-end=\"2258\"\u003e\n\u003cp data-start=\"2228\" data-end=\"2258\"\u003eLexus GS300 – JZS160 chassis\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2259\" data-end=\"2290\"\u003e\n\u003cp data-start=\"2261\" data-end=\"2290\"\u003eLeft-hand-drive (USDM) only\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2292\" data-end=\"2317\"\u003e\u003cstrong data-start=\"2292\" data-end=\"2315\"\u003eInstallation Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"2318\" data-end=\"2412\"\u003e\n\u003cli data-start=\"2318\" data-end=\"2339\"\u003e\n\u003cp data-start=\"2320\" data-end=\"2339\"\u003eDrilling required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2340\" data-end=\"2370\"\u003e\n\u003cp data-start=\"2342\" data-end=\"2370\"\u003eWiring relocation required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2371\" data-end=\"2412\"\u003e\n\u003cp data-start=\"2373\" data-end=\"2412\"\u003eProfessional installation recommended\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2414\" data-end=\"2605\"\u003e\u003cstrong data-start=\"2414\" data-end=\"2429\"\u003eDisclaimer:\u003c\/strong\u003e\u003cbr data-start=\"2429\" data-end=\"2432\"\u003eThis product is intended for off-road and motorsports use. Manual transmission swaps require fabrication and mechanical knowledge. Always verify fitment before installation.\u003c\/p\u003e\n\u003cp data-start=\"2607\" data-end=\"2871\"\u003e\u003cstrong data-start=\"2607\" data-end=\"2657\"\u003eWhy Choose This JZS160 Clutch Pedal Assembly?:\u003c\/strong\u003e\u003cbr data-start=\"2657\" data-end=\"2660\"\u003eWith no factory option available for USDM GS300s, this clutch pedal assembly provides a strong, purpose-built solution for JZS160 manual swaps—saving time, reducing guesswork, and ensuring proper pedal geometry.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"None","offer_id":51362064433473,"sku":"sku-43442888409176","price":192.0,"currency_code":"USD","in_stock":true},{"title":"Master Cylinder CM-S1","offer_id":51362064466241,"sku":"T-S160-CPM-Master Cylinder","price":227.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/xcessive-manufacturing-jzs160-clutch-pedal-98-05-gs300-9231867.png?v=1770334752"},{"product_id":"is300-xcessive-manufacturing-clutch-pedals","title":"Xcessive Manufacturing Manual Conversion Clutch Pedal (Lexus IS300 2001-2005)","description":"\u003cp\u003eIf you're planning a 5-speed swap on your Lexus IS300 LHD chassis, Xcessive Manufacturing has designed the perfect clutch pedal kit to support this conversion. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Vehicle Fitment and Installation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IS300 comes with a factory mounting location utilized in this setup. The kit includes a new clutch master cylinder sourced from a '90-'93 Toyota Celica, featuring a 5\/8\" bore, compatible with most factory slave cylinders. The use of Toyota's original mounting location ensures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClearance of the brake booster in the engine bay.\u003c\/li\u003e\n\u003cli\u003eProper positioning of the clutch pedal in the cabin without interfering with electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not all chassis have the required mounting holes, so many automatic-to-manual conversions will need to drill the firewall to mount the bolts and slave cylinder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaster Cylinder Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 5\/8\" bore master cylinder: Ideal for external slave cylinders used in many Toyota, Nissan, and BMW transmissions.\u003c\/li\u003e\n\u003cli\u003eOptional 3\/4\" bore master cylinder: Commonly used for concentric slave cylinders, especially those in CD009 HR, T-56, TR-6060, and other conversions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePedal Pads: \u003c\/strong\u003eThe pedal comes with a standard powder-coated finish. If you prefer a more OEM look, an optional rubber pad is available, fitting neatly on the pedal for enhanced grip and aesthetics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction and Hardware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary bracket: Made from 1\/8\" steel, ensuring durability.\u003c\/li\u003e\n\u003cli\u003eHanging pedal arm: Crafted from 1\/4\" steel with a 12mm pivot for smooth operation.\u003c\/li\u003e\n\u003cli\u003eThe kit includes all necessary bolting hardware for mounting the clutch pedal and connecting the master cylinder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The correct clutch line for your transmission is sold separately. Braided stainless steel clutch lines are also available for purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKits Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBolt-in clutch pedal base.\u003c\/li\u003e\n\u003cli\u003eClutch pedal arm positioned for your setup.\u003c\/li\u003e\n\u003cli\u003eOptional master cylinder kit, which may be needed depending on your specific application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLexus IS300 (2001-2005).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your Lexus IS300 for a smooth manual transmission swap with Xcessive Manufacturing’s Clutch Pedal Kit—designed for precision and ease of installation.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"IS300 Pedal \/ None \/ None","offer_id":51362065482049,"sku":"JCE10 Clutch Pedals-6","price":192.0,"currency_code":"USD","in_stock":true},{"title":"IS300 Pedal \/ None \/ Pedal Pad","offer_id":51362065449281,"sku":"JCE10 Clutch Pedals-5","price":199.95,"currency_code":"USD","in_stock":true},{"title":"IS300 Pedal \/ 5\/8 Bore Master \/ None","offer_id":51362065416513,"sku":"JCE10 Clutch Pedals-2","price":230.0,"currency_code":"USD","in_stock":true},{"title":"IS300 Pedal \/ 5\/8 Bore Master \/ Pedal Pad","offer_id":51362065383745,"sku":"JCE10 Clutch Pedals-1","price":237.95,"currency_code":"USD","in_stock":true},{"title":"None \/ None \/ Pedal Pad","offer_id":51362065580353,"sku":"JCE10 Clutch Pedals-11","price":7.95,"currency_code":"USD","in_stock":true},{"title":"None \/ 5\/8 Bore Master \/ None","offer_id":51362065547585,"sku":"JCE10 Clutch Pedals-8","price":38.0,"currency_code":"USD","in_stock":true},{"title":"None \/ 5\/8 Bore Master \/ Pedal Pad","offer_id":51362065514817,"sku":"JCE10 Clutch Pedals-7","price":45.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/t-sxe10-cpm-k1_1-Photoroom.jpg?v=1770333599"},{"product_id":"xcessive-manufacturing-ar5-flat-mount-to-toyota-late","title":"Xcessive Manufacturing AR5 to Toyota Urethane Transmission Flat Mount Adapter - Late","description":"\u003cp data-end=\"797\" data-start=\"202\"\u003eUpgrade your drivetrain swap with the AR5 to Toyota Urethane Mount, engineered to adapt the AR5 (MA5) transmission to the Toyota R154 mounting location when paired with a JZ–R154 bellhousing. Because the AR5 sits ½ inch taller from output shaft centerline to the mount base compared to the R154, some setups may require a ½-inch spacer to lower the transmission crossmember and properly align the driveline. Designed for flat-bottom AR5 units, this mount utilizes the early MK3 Supra four-stud bolt pattern, making it the correct choice for builds using the smaller bolt spacing.\u003c\/p\u003e\n\u003cp data-end=\"972\" data-start=\"799\"\u003e\u003cstrong data-end=\"845\" data-start=\"799\"\u003eDesigned for AR5 to R154 Mounting Location: \u003c\/strong\u003ePrecisely engineered to adapt the AR5 (MA5) transmission to the Toyota R154 mount position when using a JZ–R154 bellhousing.\u003c\/p\u003e\n\u003cp data-end=\"1171\" data-start=\"974\"\u003e\u003cstrong data-end=\"1002\" data-start=\"974\"\u003eCorrect Height Alignment: \u003c\/strong\u003eSince the AR5 sits 0.5\" higher than the R154 at the mount point, a ½-inch spacer may be necessary to align the output shaft centerline with the factory R154 geometry.\u003c\/p\u003e\n\u003cp data-end=\"1382\" data-start=\"1173\"\u003e\u003cstrong data-end=\"1212\" data-start=\"1173\"\u003eEarly MK3 Supra 4-Stud Bolt Pattern: \u003c\/strong\u003eFeatures the smaller four-stud pattern used on early MK3 Supra mounts. If you need the IS300-style larger pattern, select the AR5 to Toyota – Late Mount instead.\u003c\/p\u003e\n\u003cp data-end=\"1563\" data-start=\"1384\"\u003e\u003cstrong data-end=\"1412\" data-start=\"1384\"\u003eFor Flat-Bottom AR5 Only: \u003c\/strong\u003eDesigned exclusively for AR5\/MA5 transmissions with the flat-bottom two-bolt lower mounting surface.\u003cbr data-end=\"1522\" data-start=\"1519\"\u003e\u003cem data-end=\"1563\" data-start=\"1522\"\u003eNot compatible with V-style AR5 mounts.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-end=\"1715\" data-start=\"1565\"\u003e\u003cstrong data-end=\"1598\" data-start=\"1565\"\u003eDurable Urethane Construction: \u003c\/strong\u003eProvides increased stability, improved longevity, and reduced drivetrain deflection compared to OEM rubber mounts.\u003c\/p\u003e\n\u003cp data-end=\"1736\" data-start=\"1717\"\u003e\u003cstrong data-end=\"1734\" data-start=\"1717\"\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"1978\" data-start=\"1737\"\u003e\n\u003cli data-end=\"1791\" data-start=\"1737\"\u003e\n\u003cp data-end=\"1791\" data-start=\"1739\"\u003eAR5 \/ MA5 transmission (flat-bottom, 2-bolt style)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1827\" data-start=\"1792\"\u003e\n\u003cp data-end=\"1827\" data-start=\"1794\"\u003eJZ–R154 bellhousing conversions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1879\" data-start=\"1828\"\u003e\n\u003cp data-end=\"1879\" data-start=\"1830\"\u003eEarly MK3 Supra 4-stud crossmember bolt pattern\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1915\" data-start=\"1880\"\u003e\n\u003cp data-end=\"1915\" data-start=\"1882\"\u003eNot compatible with V-mount AR5\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1978\" data-start=\"1916\"\u003e\n\u003cp data-end=\"1978\" data-start=\"1918\"\u003eFor larger IS300-style pattern, use the Late Mount version\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2279\" data-start=\"1980\"\u003e\u003cstrong data-end=\"2006\" data-start=\"1980\"\u003eWhy Choose This Mount?\u003c\/strong\u003e\u003cbr data-end=\"2009\" data-start=\"2006\"\u003eThis mount is purpose-built for AR5 swap setups requiring proper R154 alignment. Its precise geometry, urethane durability, and correct bolt pattern make it a reliable and problem-free solution—no guesswork, no fabrication, just the right fit for your JZ\/AR5 conversion.\u003c\/p\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Orange 80A Bushings (Normal)","offer_id":51362066530625,"sku":"AR5-UTM-A-S4","price":141.5,"currency_code":"USD","in_stock":true},{"title":"Yellow 65A Bushings (Softer)","offer_id":51362066563393,"sku":"AR5-UTM-A-S4-Y","price":141.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/xcessive-manufacturing-ar5-flat-mount-to-toyota-late-8705567.png?v=1770341844"},{"product_id":"mx73-83-transmission-cross-member","title":"Xcessive Manufacturing MX73\/83 Transmission Cross Member (Toyota Cressida 89-92)","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cdiv class=\"flex-1 overflow-hidden\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-ncvpi-79elbk h-full\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-ncvpi-1n7m0yu\"\u003e\n\u003cdiv class=\"flex flex-col text-sm pb-9\"\u003e\n\u003cdiv class=\"w-full text-token-text-primary\" data-testid=\"conversation-turn-223\"\u003e\n\u003cdiv class=\"px-4 py-2 justify-center text-base md:gap-6 m-auto\"\u003e\n\u003cdiv class=\"flex flex-1 text-base mx-auto gap-3 md:px-5 lg:px-1 xl:px-5 md:max-w-3xl lg:max-w-[40rem] xl:max-w-[48rem] group final-completion\"\u003e\n\u003cdiv class=\"relative flex w-full flex-col agent-turn\"\u003e\n\u003cdiv class=\"flex-col gap-1 md:gap-3\"\u003e\n\u003cdiv class=\"flex flex-grow flex-col max-w-full\"\u003e\n\u003cdiv data-message-author-role=\"assistant\" data-message-id=\"51c5eb84-1b8e-4b50-b829-f9f43a8d4ba7\" class=\"min-h-[20px] text-message flex flex-col items-start gap-3 whitespace-pre-wrap break-words [.text-message+\u0026amp;]:mt-5 overflow-x-auto\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cp\u003eUpgrade your Toyota Cressida MX73\/83 with our precision-engineered Transmission Cross Member. Designed as a direct replacement for stock cross members, our innovative design features added slotting for enhanced engine placement adjustment and simplified installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eEnhanced Adjustment:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Added slotting allows for precise engine placement adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eDurable Construction:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Crafted from 1\/4\" laser-cut steel, formed, and plated for maximum durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eEasy Installation:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Includes new bolting hardware for hassle-free installation, eliminating the need for old, worn-out bolts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eCompatible with Early-Style Mount:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Fits the early-style rubber transmission mount with a bolt spacing of 2.2\" or 56mm side to side, typical of MK3 Supras.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eVersatile Compatibility:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Compatible with early-style transmissions; adapter mount available for late-style mounts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eKit Contents:\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e Includes 1 Transmission cross member, 4 new chassis bolts, and 4 washers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with late-style rubber transmission mounts without adapter mount (part number T-UTM-S4).\u003c\/li\u003e\n\u003cli\u003eUrethane transmission mount not included with cross member.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your MX73\/83 transmission system with our Transmission Cross Member for improved performance, durability, and precision. Experience smoother engine placement adjustment and enhanced driving dynamics with our quality-engineered cross member.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Xcessive Manufacturing","offers":[{"title":"Default Title","offer_id":51362066596161,"sku":"T-MX-TCM","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/xcessive-manufacturing-mx7383-transmission-cross-member-toyota-cressida-768300.jpg?v=1770340556"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/collections\/swap-parts-506983.jpg?v=1707777450","url":"https:\/\/lunaticsco.com\/collections\/swap-parts.oembed?page=4","provider":"Lunaticsco","version":"1.0","type":"link"}