{"product_id":"2jz-gte-ge-non-vvt-i-cam-seal-installer","title":"MK1 Motorsport Toyota \u0026 Lexus 2JZ GTE \/ GE Non-VVT-i Engine Cam Seal Installer","description":"\u003cp\u003e\u003cspan\u003eThe MK1 Motorsport 2JZ GTE \/ GE Non-VVT-i Cam Seal Installer is a purpose-built service tool designed to make camshaft seal installation on Toyota 2JZ Non-VVT-i engines more controlled and repeatable. Designed for JZ enthusiasts, mechanics, and engine builders, the tool helps properly seat the cam seal after accessing the front camshaft journal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eManufactured using FDM 3D printing from high-infill black ASA plastic, the installer is designed for repeated workshop use. Its application-specific design incorporates a keyway for alignment with the camshaft dowel pin and bottoms against the first cam cap to provide a consistent installation position.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDesigned for 2JZ GE \u0026amp; GTE Non-VVT-i Engines:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Purpose-built for camshaft seal installation on compatible Toyota 2JZ-GE and 2JZ-GTE Non-VVT-i engines.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eControlled Seal Installation:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Helps seat the camshaft seal evenly and consistently without relying on improvised seal drivers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCamshaft Keyway Alignment:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e The installer incorporates a keyway designed to align with the dowel pin on the camshaft during installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRepeatable Installation Depth:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Designed to bottom against the surface of the first cam cap to provide a consistent stopping point.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eTwo Installation Methods:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Can be used with the factory camshaft bolt or carefully driven into position using a rubber mallet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHigh-Infill ASA Construction:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e FDM 3D printed from high-infill black ASA plastic for durability and repeated workshop use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDesigned \u0026amp; Fabricated in the USA:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e All components are designed and fabricated in the United States.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWhat's Included\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(1) MK1 Motorsport 2JZ GTE \/ GE Non-VVT-i Cam Seal Installer\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eToyota 2JZ-GE Non-VVT-i engine applications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eToyota 2JZ-GTE Non-VVT-i engine applications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible Toyota and Lexus vehicles equipped with an applicable 2JZ Non-VVT-i engine\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible engine swap and standalone engine applications using an applicable 2JZ-GE or 2JZ-GTE Non-VVT-i engine\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBrand: MK1 Motorsport\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct Type: Cam Seal Installer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEngine Family: Toyota 2JZ\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEngine Compatibility: GE \/ GTE\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEngine Configuration: Non-VVT-i\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaterial: ASA Plastic\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eColor: Black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConstruction: High-Infill\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eManufacturing Process: FDM 3D Printed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstallation Reference: First Cam Cap\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlignment Feature: Camshaft Dowel Pin Keyway\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesign \u0026amp; Fabrication Location: USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntended Use: Camshaft Seal Installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eQuantity: 1\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Method 1: Recommended\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\u003cspan\u003eLubricate the inner lip of the camshaft seal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePosition the seal onto the front main camshaft journal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlace the MK1 Motorsport Cam Seal Installer over the seal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlign the installer's keyway with the dowel pin on the camshaft.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInsert the factory camshaft bolt through the installer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCarefully tighten the bolt to begin seating the seal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eContinue until the installer bottoms against the surface of the first cam cap.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not over-tighten the installer. A firm fit is all that is required.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Method 2\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\u003cspan\u003ePosition the seal onto the front main camshaft journal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLightly press the seal into position by hand using the installer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlign the installer's keyway with the camshaft dowel pin.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePosition the installer over the cam seal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse a rubber mallet to lightly and evenly tap the installer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eContinue until the installer bottoms against the surface of the first cam cap.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eImportant Notes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePlease allow approximately 1–2 weeks of production time before shipment due to high demand.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCamshaft seal is not included.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned specifically for compatible 2JZ-GE and 2JZ-GTE Non-VVT-i engines.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThis installer is for Non-VVT-i applications. Verify your engine configuration before ordering.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlways align the installer keyway with the camshaft dowel pin before applying force.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLubricate the inner lip of the seal before installation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not over-tighten the installer when using the factory camshaft bolt method.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse a rubber or other appropriate non-marring mallet when following Method 2.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKeep the seal properly centered during installation to reduce the risk of damage or improper seating.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInspect the installer for cracks, deformation, or other damage before each use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRefer to the appropriate Toyota service information for engine disassembly, reassembly, and final fastener torque specifications.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWhy Choose MK1 Motorsport?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MK1 Motorsport 2JZ GTE \/ GE Non-VVT-i Cam Seal Installer provides an application-specific alternative to improvised cam seal installation methods. Its keyed design helps maintain alignment with the camshaft, while the first cam cap provides a consistent stopping point during installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor enthusiasts, mechanics, and engine builders regularly servicing Toyota 2JZ Non-VVT-i engines, it provides a reusable tool for making camshaft seal replacement more controlled and repeatable.\u003c\/span\u003e\u003c\/p\u003e","brand":"MK1 Motorsport","offers":[{"title":"Grey","offer_id":67819436605761,"sku":"sku-46577046651176","price":9.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":67819436638529,"sku":"sku-46577046683944","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/IMG_E2420.png?v=1791173046","url":"https:\/\/lunaticsco.com\/products\/2jz-gte-ge-non-vvt-i-cam-seal-installer","provider":"LunaticsCo","version":"1.0","type":"link"}