{"product_id":"2jz-gte-ge-non-vvt-i-seal-installer-combo","title":"MK1 Motorsport Toyota \u0026 Lexus 2JZ GTE\/GE Non VVT-i Engine Seal Installer Combo","description":"\u003cp\u003e\u003cspan\u003eThe MK1 Motorsport 2JZ GTE \/ GE Non VVT-i Seal Installer Combo is a complete service tool set designed to make crankshaft and camshaft seal installation on Toyota 2JZ Non VVT-i engines more controlled and repeatable. Designed for JZ enthusiasts, mechanics, and engine builders, the kit includes dedicated tools for servicing the front main, rear main, and camshaft seals.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach installer is FDM 3D printed from high-infill ASA plastic for durability and repeated workshop use. By providing application-specific tools for several common 2JZ seal replacement procedures, the combo eliminates the need to improvise separate seal drivers during engine maintenance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eComplete 2JZ Seal Installer Kit:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Includes dedicated tools for servicing the front main, rear main, and camshaft seals on compatible 2JZ Non VVT-i engines.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDesigned for GE \u0026amp; GTE Engines:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Suitable for compatible Toyota 2JZ-GE and 2JZ-GTE Non VVT-i applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eControlled Seal Installation:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Helps seat crankshaft and camshaft seals in a simple and repeatable manner.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFront Main Seal Installer:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Includes an application-specific tool for servicing the front crankshaft main seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRear Main Seal Installer:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Includes a dedicated installer for servicing the rear crankshaft main seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eNon VVT-i Cam Seal Installer:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Includes the appropriate installer for servicing compatible 2JZ GE\/GTE Non VVT-i camshaft seals.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eTwo Installation Methods:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Depending on the seal being serviced, the installer can be used with the applicable factory fastener or carefully driven into position using a rubber mallet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHigh-Infill ASA Construction:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e FDM 3D printed from high-infill ASA plastic for durability and repeated workshop use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDesigned \u0026amp; Fabricated in the USA:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e All components are designed and fabricated in the United States.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWhat's Included\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e(1) MK1 Motorsport 1JZ \/ 2JZ Front Main Seal Installer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) MK1 Motorsport 1JZ \/ 2JZ Rear Main Seal Installer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) MK1 Motorsport 2JZ GTE \/ GE Non VVT-i Cam Seal Installer\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eVehicle Fitment\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eToyota 2JZ-GE Non VVT-i engine applications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eToyota 2JZ-GTE Non VVT-i engine applications\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible Toyota and Lexus vehicles equipped with an applicable 2JZ Non VVT-i engine\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible engine swap and standalone engine applications using an applicable 2JZ-GE or 2JZ-GTE Non VVT-i engine\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBrand: MK1 Motorsport\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct Type: Engine Seal Installer Combo\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEngine Family: Toyota 2JZ\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEngine Compatibility: GE \/ GTE\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEngine Configuration: Non VVT-i\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstaller Applications: Front Main Seal, Rear Main Seal, and Camshaft Seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaterial: ASA Plastic\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConstruction: High-Infill\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eManufacturing Process: FDM 3D Printed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesign \u0026amp; Fabrication Location: USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntended Use: Crankshaft and Camshaft Seal Installation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Method 1: Recommended\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\u003cspan\u003eLubricate the inner lip of the applicable seal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCarefully position the seal at the applicable camshaft or crankshaft location.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlace the corresponding MK1 Motorsport seal installer over the seal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInsert the applicable factory camshaft or crankshaft fastener through the installer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCarefully tighten the fastener to begin seating the seal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eContinue until the installer reaches its designed stopping point.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not over-tighten the installer. A firm, snug fit is all that is required.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Method 2\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\u003cspan\u003eLubricate the inner lip of the applicable seal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCarefully position the seal at the appropriate camshaft or crankshaft location.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlace the corresponding seal installer over the seal and lightly press it into position by hand.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse a rubber mallet to lightly and evenly tap the installer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eContinue until the installer reaches its designed stopping point.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eImportant Notes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePlease allow approximately 1–2 weeks of production time before shipment due to high demand.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEngine seals are not included.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for compatible Toyota 2JZ-GE and 2JZ-GTE Non VVT-i applications.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse the correct installer for the front main, rear main, or camshaft seal being serviced.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLubricate the inner lip of the applicable seal before installation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not over-tighten the installer when using the factory fastener installation method.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse a rubber or other appropriate non-marring mallet when following Method 2.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKeep each seal properly centered during installation to reduce the risk of seal damage or improper seating.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRefer to the individual MK1 Motorsport seal installer instructions for application-specific installation procedures.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInspect each installer for cracks, deformation, or other damage before use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRefer to the appropriate Toyota service information for engine disassembly, reassembly, and final fastener torque specifications.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWhy Choose MK1 Motorsport?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MK1 Motorsport 2JZ GTE \/ GE Non VVT-i Seal Installer Combo combines three application-specific service tools into one package for Toyota JZ enthusiasts, mechanics, and engine builders.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith dedicated front main, rear main, and cam seal installers, the kit provides a repeatable approach to common 2JZ Non VVT-i seal replacement procedures while reducing the need for improvised installation tools.\u003c\/span\u003e\u003c\/p\u003e","brand":"MK1 Motorsport","offers":[{"title":"Grey","offer_id":67819436507457,"sku":"10","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":67819436540225,"sku":"10","price":45.99,"currency_code":"USD","in_stock":true},{"title":"TRD Stripes","offer_id":67819436572993,"sku":"sku-47110448546088","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/9362\/5921\/files\/IMG_2903.png?v=1791173057","url":"https:\/\/lunaticsco.com\/products\/2jz-gte-ge-non-vvt-i-seal-installer-combo","provider":"LunaticsCo","version":"1.0","type":"link"}