Action Stage 3 Clutch Kit (1MS) for Lexus IS300 2002-2005 3.0L (2JZ-GE) W55

Action Clutch's Stage 3 (1MS) Clutch Kit is designed for peak performance and extreme durability, especially for low to mild horsepower vehicles. Here are the key specifications and details:

Product Type: Stage 3 Clutch Kit (1MS)

Product Weight: Approximately 21 pounds

SFI Certification: SFI Spec 1.1 compliant for Replacement Flywheels and Clutch Assemblies

Features:

• Heavy-duty single diaphragm pressure plate.
• Reinforced drive straps.
• Available with a Sprung MIBA Ceramic disc in 4 or 6 puck configurations.
• Provides maximum control and power with minimal compromise on reliability.
• Suitable for heavy-duty street use and occasional drag, road, or drift racing.
• Not compatible with a factory Dual Mass flywheel.

What’s Included:

• Sprung MIBA Ceramic 6 Puck Disc (in this specific configuration)
• Single Diaphragm HD Pressure Plate
• Pilot Bearing / Bushing (when applicable)
• Clutch Alignment Tool
• Conventional Release Bearing

Break-in Requirements:

• Drive for 500 street miles.
• Keep RPM’s under 4500.
• Use no more than half-throttle.
• Avoid boost (if applicable).
• Proper break-in is required to retain the product warranty, ensure longevity, and maintain holding capacity.

Disclaimers:

• Ceramic-based clutch discs intend to increase holding capacity and durability but may not significantly increase the clutch's life expectancy.
• Using a ceramic-based material for easy street driving may lead to premature wear due to harsher engagement and a higher tendency to slip the clutch during street driving.

Please note the Prop 65 WARNING for California Residents, indicating that the product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. It's recommended to wash hands after handling the product. For more information, you can visit www.P65Warnings.ca.gov.