Installing an IS300 Harness Bar
In this video, we demonstrate the installation of a 49" Harness Bar on a Lexus IS300. Here are the step-by-step instructions for installing the harness bar:
- Begin by removing the plastic covers that conceal the bolts located at the top and bottom of the seat belt. This will expose the bolts for further manipulation.
- Unbolt the top bolt on both the driver and passenger sides of the vehicle.
- Align the U-shaped bar with the top corresponding holes and slide the bolts through the seatbelt and the holes on the bar. Hand-tighten these bolts to secure them in place.
- Next, remove the bottom bolt from the lower seatbelt.
- Use the bolt to pass through one of the straight leg eyelets, then through the seatbelt, and finally secure it back into the body of the car.
- Adjust the height of the harness bar to ensure that the U-bar is positioned at shoulder level.
- Attach the straight arm to the U-bar.
- Repeat these steps for the other side of the harness bar installation, making sure to securely tighten all the bolts.
By following these steps, you'll successfully install the harness bar on your Lexus IS300. Get yours today here!