Skip to content
Xcessive Manufacturing Chassis Heim Tie Rod Adapters Toyota Cressida MX73/89 85-92 - Lunaticsco

Xcessive Manufacturing Chassis Heim Tie Rod Adapters Toyota Cressida MX73/89 85-92

by Xcessive Manufacturing
$192.00 - $198.00
$192.00
$192.00 - $198.00
$192.00

Improve steering geometry and reduce bump steer with the Xcessive Manufacturing Chassis Heim Tie Rod Adapters for Toyota Cressida MX chassis. Designed for use with Xcessive Manufacturing steering arms and extended lower control arms, these heavy-duty heim joint adapters provide increased steering precision while accommodating aggressive suspension setups commonly found on drift and track cars.

Engineered to fit the factory steering knuckle taper, these adapters thread directly onto the factory inner tie rods while allowing approximately 15mm of tie rod pivot point drop. This improved geometry helps reduce bump steer beyond what traditional roll center adjusters alone can achieve, resulting in more consistent steering response on lowered vehicles.

Designed for Performance Suspension: Built for use with Xcessive Manufacturing steering arms and extended lower control arms.

Reduces Bump Steer: Lowers the tie rod pivot point approximately 15mm to improve steering geometry on lowered vehicles.

Factory Taper Fitment: Installs directly into the factory steering knuckle taper for straightforward installation.

Heim Joint Precision: Spherical rod end design delivers precise steering feedback with minimal deflection.

Wide Track Compatible: Long-series rod ends and couplers are designed for wide-track suspension setups.

Supports Increased Steering Angle: Compatible with Xcessive Manufacturing Standard and Zero Ackerman steering arms for maximum steering performance.

What's Included

  • (2) Xcessive Manufacturing Heim Tie Rod Adapters

Vehicle Fitment

  • Toyota Cressida MX73 (1985-1988)

  • Toyota Cressida MX83 (1989-1992)

  • Toyota MX chassis utilizing factory-style steering knuckle taper

Important Notes

  • Designed for use with Xcessive Manufacturing steering arms and extended lower control arms.

  • Compatible with factory steering arms and aftermarket steering arms utilizing the factory steering knuckle taper.

  • Intended for vehicles lowered approximately 2 to 3 inches.

  • Not recommended for stock ride height vehicles, as excessive tie rod angle can cause heim joint binding and premature component failure.

  • Long-series rod ends are intended for wide-track front suspension setups and are too long for factory lower control arms.

  • Compatible with Xcessive Manufacturing Standard and Zero Ackerman steering arms.

  • Provides up to 2 inches of additional track width per side when used with Zero Ackerman steering arms and MX83 inner tie rods.

  • Inner tie rods and steering arms are not included.

  • Professional installation and a complete alignment are required after installation.

  • Intended for off-road, drifting, racing, and competition vehicle applications.

Why Choose Xcessive Manufacturing

Xcessive Manufacturing designs steering and suspension components specifically for enthusiasts demanding maximum steering angle, improved suspension geometry, and precise handling. Their Heim Tie Rod Adapters reduce bump steer while increasing steering precision, making them an ideal upgrade for drift cars and other high-performance Toyota builds.

Whether you're building a competitive drift car or refining the steering geometry on your lowered Cressida, the Xcessive Manufacturing Chassis Heim Tie Rod Adapters deliver the strength, adjustability, and precision needed to maximize front suspension performance.

About Us

We are passionate Lexus and Toyota enthusiasts dedicated to providing the highest quality aftermarket parts to enhance your ride. Our goal is to help you find the perfect performance upgrade, whether you're building your dream car or just adding that next improvement. We take pride in offering products that we trust for our own vehicles.

Shipping

Shipping times vary based on item availability and specific lead times. You can expect an email with an estimated shipping date within 1-3 days of placing your order. Many in-stock parts ship within 2-5 business days, while certain built-to-order items may take up to 7-10 business days. For back-ordered items, availability may vary, but we will email you with any ETA changes.

Once your items are ready to ship, we will send tracking information via email so you can easily follow your package from our warehouse to your door. Please note, some parts may be shipped separately and could arrive at different times. Shipping costs apply to the lower 48 states, unless stated otherwise, and international orders may be subject to additional customs or duties fees.

What to Expect Upon Delivery

Upon receiving your order, please inspect the items immediately for any damage or missing parts. Verify all items against the packing slip or instructions before starting installation. We cannot be held responsible for costs incurred from delays due to missing items.

If any items are damaged or missing, please get in touch with us within 14 days of receipt so we can assist with a replacement. Claims made after this period will not be honored.

Cancellation Policy

If you need to cancel or modify your order, please contact us as soon as possible. We strive to ship your order quickly, and once processing begins, cancellations may be subject to a restocking fee. Orders canceled within 24 hours of purchase may not incur a fee, but after that time, restocking fees (typically 20%) will apply depending on the items and the stage of fulfillment.

Return Policy

Customer satisfaction is our priority, and we are happy to assist with returns. However, due to the complexity of sourcing and delivering our products, returns are subject to a restocking fee (usually 20%) based on the item and manufacturer.

Before returning any items, please get in touch with us to receive a return authorization. All return requests must be made within 30 days of receiving your merchandise. Once approved, items must be returned within 14 days in their original condition. Improper packaging of returned items may result in customer responsibility for damages.

Customers are responsible for return shipping costs, unless the item is defective or we shipped the wrong item. A trackable shipping method is strongly recommended.

Warranty

We honor all manufacturer warranties and are here to support you in getting the quality products you deserve. However, please note that warranty claims are available to the original purchaser only. In certain situations, manufacturers may handle warranty claims directly, and we are unable to cover costs not specified in the manufacturer's warranty (e.g., shipping, labor). If you have any questions, feel free to reach out to us.

Emissions Notes

All parts and services offered by LunaticsCo are for competition vehicles only. Use on state and federal highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document details what are considered violations of the CAA and the corresponding penalties for failure to comply. It should be read in full before purchasing or installing this competition-use-only product. Ensuring that all emissions, noise/sound, and speed/use-related laws are followed is the responsibility of the buyer(s). Installation and use of this product indicate that this disclaimer has been read, acknowledged, and fully understood by both the buyer(s) and installer(s). The buyer(s) assume all associated risks of purchase.

Federal and several state laws prohibit the removal, modification, or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. LunaticsCo assumes no liability for any violations arising out of any federal, state, or provincial emissions or safety requirements on motor vehicles resulting from the customer’s modifications and/or use of LunaticsCo products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.